I've noticed some omissions on the Soundtraxx DSD-AT100LC programmer. One
the light tab, there is only on/off and dimmable for light effects. The LC
decoder support 15 effects, using CV49 & CV50 bits 0 to 3. Also those CV
have other bits defined, Bit 4 selects the phase of the effect, bit 5
enables/disables grade crossing logic, and bit 6 allows the output to
respond to the FX1 or FX2 function instead of the HL and BL (respectively).
I use bit 6 of CV50 to allow independent rear light of F5. Also with bit 6,
since it allows FX1 & FX2 to be used, the function mapping tab needs to have
FX1 & FX2 in the table to allow functions to be assigned to them.
I find the Soundtraxx LC series Tech Ref Manual to be easier and more
complete over the LC Owners Manual.
Also, Soundtraxx supports CV106 & CV106, user defined CVs.
Also, how do I get the loco table to be sorted in Ver 1.1?
Michael Mosher
Webmaster
Daylight Division PCR/NMRA www.trainweb.org/daylight
Golden Empire Historical & Modeling Society www.trainweb.org/gehams
San Luis Obispo Model Railroad Club www.trainweb.org/slomrc
Personal
Member
Kern County Live Steamers www.trainweb.org/kernctyls
