开云体育

Thanks for the troubleshooting advice. I got cute and installed the locobuffer in a Radio Shack plastic project box. And the set up is at the club layout. Tomorrow I will remove the box cover so I

A timeout error generally means that the computer (DecoderPro) is not talking to the unit on the test track. 1) Is LED D1 on ON the LocoBuffer? 2) Is the DCS100 ON? 3) When you open the programmer

Jerry: I'm having the exact same problem, please let me know what you did. I just built my locobufer from a kit and have not gotten it to read a decoder on the test track. Bill

Well, I downloaded the latest JMRI installation files and successfully got Decoder Pro to execute. But I got an error message when attempting to read the decoder CV's. Decoder Pro kept giving an

Dave Nelson wrote:

Bob, MY EBII doesn't offer feedback thus I'm not sure how valuable the following will be; packet: ef e 7c 67 0 40 22 0 0 0 3a 33 33 5d Write Programming Track: Write Byte in OP's Mode (NO

This Yahoo group is set to "new members posts are moderated". This is because Yahoo groups are increasingly getting spammed, usually by people who sign up a spurious account, send obnoxious email,

I'm away from my layout, and just discovered that I'm not sure how to do Digitrax ops-mode writes to a _short_ address. I've just been working with long addresses so far, but need to write the

Hi- This is very similar to what I had proposed about a month ago! See: [Image] http://www3.telus.net/HarrisFamily/index.html at the bottom of the page. David Joe Ellis wrote:

--- In jmriusers@y..., "Joe Ellis" <filker@m...> wrote: <<snip>> > How about _this_ approach? > > Allow 2 decoders to be open at once, in "layered" windows. This would > let you twiddle both speed

I'm using v1.0.6 (I check frequently for updates) and a Digitrax system. Aloha, Jim

(About hslider/vslider in a pane in a the decoder file itself) Bob, I just found out why hslider/vslider did not work. I assigned a min= value to the CV. Stupid me. Sibbo -- -------------- Bob

No! I like having more than one programmer window open at a time. Then I just pop up the one I need at the moment -- much faster and convenient than reopening them, especially in a club situation,

As for as I know the answer is no. Lenz delivered some decoders for Roco products with 27 speed steps. Type and model unknown. sibbo Yahoo! Groups Sponsor

More than one ops-mode programmer can be open at a time, so that's no problem except for perhaps screen space. It might be useful to create a programmer format that's really svelte so you can fit 2

Here's my current plan for coping with the various weird and wonderful things that decoders do when you write to CV1. Comments would be very welcome. Would this really solve the problems that people

(About hslider/vslider in a pane in a the decoder file itself) I've tried a couple examples of this in 1.0.6 and didn't see it fail. If you have an example file around, would you mind sending me a

At 11:51 PM +0200 9/8/02, Sip Bosch wrote about the possibility of making parts of the decoder definition condition on the version number. We could add a "minversion" to the individual variables. The

At 12:30 PM -1000 9/8/02, Jim Buckley wrote: >A possible bug in the Sountraxx DSD150 Diesel programmer's Function Mapping >screen. I wasn't able to confirm this on any other programmers -- I