开云体育

Canadian Locomotive Logistics (for lack of better info), You have provided an open ended question, so the responses are going be like shotgun scatter guessing. Sometimes, but circumstances and

But when you program the saved file into the decoder then it programs in CV19 as well, so the compare will show as all correctly programmed. comcast.net@groups.io> wrote:

Certainly does catch it on a diitrax decoder, I wouldnt have thought any other decoder would be different. Steve G

All, Good point about the command station. Something to check out. But about CV 19, would that not be caught in the CVs tab Compare?? Regards

Are you connecting with a LocoBuffer-USB, or directly via the DCS240+? A couple people have reported the direct connection in the DCS240+ locking up. The workaround is to _completely_ power it off

Environment is a Raspberry Pi 3B with bookworm, Java 17, JMRI 5.10 I recently replaced our club DCS200 (it died) with a DCS240+. ?There has long been a Pi3 running JMRI controlling the layout via

that's exactly what I'm looking to accomplish Ken, thanks for the insight and I'm sure ill be back with more questions! John Yahoo Mail: Search, Organize, Conquer

Steve, I am just going by what I have seen with those symptoms before, Somehow a hiccup in the decoder, a spike on the track, someone miss typing while setting up a consist and the loco may have been

Ken: "Duplicate" transit and then edit. Jean 48 hrs should get it in the nightly Development build. In changes " Fix dispatcher tsa loadtraininfo ( https://github.com/JMRI/JMRI/pull/13995 ) " should

Don While you are looking at the SlotMonitor, sort by address (click on the header) and check to see if the loco is in 2 slots, it does happen. Steve G.

Peter. Once a car is assigned to a built train, the car can't be used by another.? You should only build, then print out your four trains.? Only terminate them when they actually finish their

I use one to many connections for logic and scripts. The only caveat is when you want multiple block connections. For one to many block connections, I need to create more sensors and set those sensor

I never ran into this problem because I define a unique traininfo file for a specific locomotive and move. I do that because I run (mostly) to safe sections which are usually depots and use load

Don, On Digitrax, any "universal" consist is inside your command station, not the throttle. Changing throttle doesn't alter it. Check the "slots" in the command station. JMRI has a slot monitor

Steve G, I have played with Universal Consisting before, but not involving this loco. Tried controlling also using a UT6, instead of my DT602D, to try to eliminate such a variable. Same

Don Does the command station think it's in a consist as a non lead loco. Steve G.

Tony, Are you saying that CV 19 would somehow elude the Compare? Steve, You read the part where I say the settings had been working... for years in fact, right? No mysterious brake, BEMF, consist,

I've got 4 trains to run and I want to build the trains and print the switchlists for the engineers before the operating session starts. In doing so I noticed that one boxcar was a pickup and move by

Don, seeking help, inquires: “Recently developed a problem with one of my older diesels, an N scale Bachmann with Econami factory installled. Def used is ECO-100 Diesel. Sound was fine, loco

OK thanks Steve, I'll try the work around. Even a vague idea on when the fix will be available? JeanLouisDelestre@... ----- Mail original ----- De: "Steve_G via groups.io"