Are you connecting with a LocoBuffer-USB, or directly via the DCS240+?
A couple people have reported the direct connection in the DCS240+ locking up. The workaround is to _completely_ power it off by removing its main power connection _and_ unplug the USB connection, then reconned them power first, then USB and start JMRI.
Bob
On Mar 31, 2025, at 10:33?AM, Dale Gloer via groups.io <dale.gloer@...> wrote:
I recently replaced our club DCS200 (it died) with a DCS240+. There has long been a Pi3 running JMRI controlling the layout via Loconet. For that, in the connections panel I had selected DCS200 as the command station and Loconet-USB as the connection type.
My question is now that I have the DCS240+ in place what selection do I make for the Command station? I still use Loconet-USB for the connection type. Selecting DCS240+ as the command station results in no Loconet activity from JMRI.
--
Dale Gloer
Jack of all trades at home and Southern Alberta Model Railway
—
Bob Jacobsen
rgj1927@...
Bob Jacobsen