开云体育

His system is the first line in the original post Environment is a Raspberry Pi 3B with bookworm, Java 17, JMRI 5.10 -- Peter Ulvestad Linux Mint 22.1, JMRI 5.11.4plus, Java 21.0.6 JMRI Users Group

The problem is the USB implementation used on Microchip CPUs. I believe the CPU used in the Digitrax family is a PIC24 series microprocessor from Microchip. I have had problems with the USB CDC

Assuming that you are using a recent-enough JMRI version, select: - the "System Connection" of "LocoBuffer-USB", and - the "Command station type" of "DCS240+ (Advanced Command Station)". That has

I am one of those who reported the DCS240 locking up.? I upgraded from a DCS210 with a PR4 USB connection to a DCS240 using its USB connection.? It locked up so much that I had to purchase the

Dale, Hi! Here is what I use for the DCS 240 on my workbench and it works fine. (FYI since I added a USB isolator for the DCS240 following a lightning strike that took out USB peripherals on

Dale, When our club replaced the DCS200 several years ago with a DCS210 (not the 210+ or the 240+) there was a lot of chatter on the /g/Digitrax-Users group messages about the built

Canadian Locomotive Logistics (for lack of better info), You have provided an open ended question, so the responses are going be like shotgun scatter guessing. Sometimes, but circumstances and

But when you program the saved file into the decoder then it programs in CV19 as well, so the compare will show as all correctly programmed. [email protected]> wrote:

Certainly does catch it on a diitrax decoder, I wouldnt have thought any other decoder would be different. Steve G

All, Good point about the command station. Something to check out. But about CV 19, would that not be caught in the CVs tab Compare?? Regards

Are you connecting with a LocoBuffer-USB, or directly via the DCS240+? A couple people have reported the direct connection in the DCS240+ locking up. The workaround is to _completely_ power it off

Environment is a Raspberry Pi 3B with bookworm, Java 17, JMRI 5.10 I recently replaced our club DCS200 (it died) with a DCS240+. ?There has long been a Pi3 running JMRI controlling the layout via

that's exactly what I'm looking to accomplish Ken, thanks for the insight and I'm sure ill be back with more questions! John Yahoo Mail: Search, Organize, Conquer

Steve, I am just going by what I have seen with those symptoms before, Somehow a hiccup in the decoder, a spike on the track, someone miss typing while setting up a consist and the loco may have been

Ken: "Duplicate" transit and then edit. Jean 48 hrs should get it in the nightly Development build. In changes " Fix dispatcher tsa loadtraininfo ( https://github.com/JMRI/JMRI/pull/13995 ) " should

Don While you are looking at the SlotMonitor, sort by address (click on the header) and check to see if the loco is in 2 slots, it does happen. Steve G.

Peter. Once a car is assigned to a built train, the car can't be used by another.? You should only build, then print out your four trains.? Only terminate them when they actually finish their

I use one to many connections for logic and scripts. The only caveat is when you want multiple block connections. For one to many block connections, I need to create more sensors and set those sensor

I never ran into this problem because I define a unique traininfo file for a specific locomotive and move. I do that because I run (mostly) to safe sections which are usually depots and use load

Don, On Digitrax, any "universal" consist is inside your command station, not the throttle. Changing throttle doesn't alter it. Check the "slots" in the command station. JMRI has a slot monitor