开云体育

The SDXH187A0 has not been added as of yet. You could use the SDXH167 until it is added. The 167 would have 2 fewer output functions (the 6 versus the 8 in the 187). You are 2 years behind in JMRI

You’ll need to update. If you just download, run, it’s done. Works for me every time and just runs. Delaying updates is more likely to cause you bigger issues each

In the absence of information from the sound project (ie. which sound slot contains which sound), then the process for changing sound levels in either LokProgrammer software, or JMRI/DecoderPro is

Brett, I don't have any problem with reversing and continuous when simulating the train movement by setting occupancy and stop sensors. This implies an issue with the Dispatcher Options and/or the

Richard, Billybob has provided a script that sets a sensor to indicate the connection type. If you are using JMRI 5.2 or later, an alternate approach is to use LogixNG to set a sensor. Dave

There nothing to the left of the EStop and to the right it says Roster with the pull down. Larry

Thanks to all who have replied.? Sad to say, here in the UK the sound files are not freely available as they are in the USA and I don't believe it is possible to retrieve the files from the decoder.

I do something in a jython script to figure out whether I run a "CMRI Simulator" connection or a connection with real physical connection. It loops thru the configured connections in the current JMRI

Tony's got a point. You essentially have a gauntlet track where only one train at a time can occupy the space between turnout pairs. Sure you don't have the traditional gauntlet structure but you have

I want to modify the "PreferencesExamples" script to show me the - Preferences - System manufacture and System connection. I want to check when I'm in " Digitrax - LocoNet Simulator " mode, for use in

I use transit actions “load traininfo” and then “terminate” at the end of a transit. This is especially useful when your train has a reversing move. -- Ken NYNH&H, Old Colony Division, Cape

That worked. I had tried that technique before without success. But there were some issues in my data file now fixed. It's all good. Thanks George

Just installed a Digitrax Decoder SDXH187Ao (or 0?). Using a NCE system on program track and DP can’t find the decoder. ?Using the drop-down menu decoder selection list for Digitrax, I am unable to

HI, I'm using dispatcher, and I was wondering how I could automaticaly chain two transits for the same locomotive, or even a different

Correct, using time.sleep() stops the main JMRI thread. Since you want to have timed signal changes, you will need to use the AbstractAutomaton class. This runs in a separate thread and has a

In developing some scripts, I often print to the output, as it helps debug the program. I am noticing that the output is extremely delayed Is there anyway the output can be updated? I use print

Changes made. Runs Nicely if i just choose run in reverse. If i choose continuous as well ,the train stops at the starting block but doesnt proceed Here is a Pic of dispacther at that time,any

Steve, Here is a sample xml file. Dave Sand

Brett, Signal mast "Blk 16" has -1 for its aspect ids. For your Dispatcher issue, look at the Blk 8 Section. I would change the direction from Block 7 to FORWARD. That makes it consistent with the

Dave Sand, Where is the code for the Windows menu click? I don't have any LinkingLabels for testing. --SteveT