Re: Problems With dispatcher #dispatcher
|
Brett, Signal mast "Blk 16" has -1 for its aspect ids. For your Dispatcher issue, look at the Blk 8 Section. I would change the direction from Block 7 to FORWARD. ?That makes it consistent with the other sections. Using the same sensor for both stopping sensors makes no sense. ?Once you have the direction set, then you only need a forward stopping sensor. Dave Sand ----- Original message ----- From: "redsash63 via groups.io" <redsash63=[email protected]> Subject: Re: [jmriusers] Problems With dispatcher #dispatcher Date: Saturday, March 22, 2025 8:51 PM Hello Dave and All I have started to make some progress. I read and reread all of your threads as i could. I decided to remove all signals and Logic and restart This Time i noticed that the Offset choice was available in Signal Mast,so i thought id try it.(NCE Light its) Also understanding what happens at a turnout was a break thru to me. Anyway after creating SML things progressed ,and i have managed to automate a train thru 8 sections and return(back and forth) Then the same but choosing Restart when done(continouos) But? that it still a bit hit and miss(sometimes it says its waiting for a distant block to clear) Im pretty happy to get this far. Some Q's 1.Can you take a look at the file "Dave to Look" in the working on files to see if anything is amiss(especially Block 8 ,i still dont get that) 2.If i cannot get it to run back and forth,i noticed you mention (instead)to have multiple transits,but i dont know how you do that in dispatcher,if you could give a quick tip) 3.The train speed is a mystery thru sections.Is it guided by my info ive given to blocks?(distance ,curves)It seems to go fast in some and slow in other.(do i have to set instructions in every section?) Thanks Again Regards Brett. If anyone is interest in my layout,i have a YT channel called A Good Day to Railway.You are most welcome to visit. |