开云体育

Hi Thank you so much for your help with this. It is very much appreciated. I have just uploaded the latest exhib1.xml file to the same location. Most issues are now solved but there are still a few

But, how often do you need to read all cvs anyway?? I typically do it ONCE per decoder, so the wait isn’t that onerous - even with a Ras Pi. Phil G

Considering those issues, JMRI Warrants don't use train length but does provide for 'Automatic Speed Profiling'. Essentially calculating the time a train should take to traverse a block. If you used

All, I've used a SPROG 3 for several years now as my programming track interface to DecoderPro. Has been very reliable. Regards

Either name will work. I use the user name. Dave Sand

Mast name is system name or user name?

Thank You all for the very informative answers. -- Heath @ Human[c]ity http://www.humancity.org ( http://www.humancity.org/ ) http://www.riversidetransfer.nyc ( http://www.riversidetransfer.nyc/

DEAR STEVE Can you fill me in on the apparently new features in automation - using train length instead of having your last car and if needed your middle car with resistive wheels and using a ghost

The information is in the JMRI Javadoc. For signal masts, it is at https://www.jmri.org/JavaDoc/doc/undefined/jmri/SignalMast.html Here is a Jython fragment. The "if" statement checks to see if the

See JMRI's SignalMastFollower.py script. It uses: self.outSignal.setAspect(self.inSignal.getAspect()) This is what that script needs to do to make one signal mast reflect another signal mast's

Heath, Not a command station, but my PR4 will reliably read all the CV's on a LokSound in about 20-25 minutes. That's not as fast as the LokProgrammer, because as Ross pointed out, the LokProgrammer

Standard DCC is a one-way protocol: [NMRA] standard DCC command stations can only send messages to DCC decoders and DCC decoders cannot send messages to [NMRA] standard DCC command stations (yes,

Here is a list of signal mast i have set up does anyone have the syntax for jython to change the aspect of the signal. i’m not finding it anywhere.

Heath, The NMRA method of ‘reading’ CV values is the JMRI read time ‘weak link.’ The LokProgrammer uses a proprietary method for quickly reading and writing CV values. However,

I really like Decoder Pro. But, the ESU Programmer is significantly faster at reading/writing ESU decoders. Is there a command station or other computer to DCC interface that I can use with JMRI

I have never used Operations. But if you have a track with removable cassettes, why not set the track length to a much higher value, for example 24 cars? Daniel

My staging cassette will accept maybe six 40ft boxcars. I'd like my daily turn to drag more than just six cars to staging. Right now, ops build will only populate a train for that staging "track"

Yes, there is a"software" solution ... rather two solutions now. Steve_G added a "ghost" block to be connected to a turnout. When both real detectors on either side of the turnout are active, the

I don't know the best way to remove old listeners, but I have tested this and it seems to work. Jython variables that are not within a class are global for the duration of the JMRI session. The

With tiny cameras in our phones, and AI, and ever higher integration, someday soon it should be possible to have a camera in every loco, and have it run on clear track, obey signals if they are used,