开云体育

Hey John, Yes, I understood that to be the case, so if you look at *image 3* , this is the filter on the track at "Interchange" (remember, I used only one track to have the local do it's work before

Scott, Make duplicate transits so each train has it's own transit. I usually have virtual signals or physical ones look at two blocks ahead so no moving into train ahead. Roger

Thanks for getting back to me. Somebody volunteered to help with some testing. Unfortunately, none of the four methods JMRI knows for setting op switches seemed to work for the BDL716. So we’re

I have been trying to get 8 trains running in automation on 4 loops for at least 5 years or more and have not succeeded. The first issue is mechanical. Can you run the specific engine and cars over

David, Look at https://www.jmri.org/help/en/html/setup/profiles.shtml Dave Sand

Hi Each train has to start in a seperate section, so you should have 1 transit for each train. So if you have 20 staged trains parked in sections S1-S20 you have 20 transists? S1->S1, S2->S2 ......

Thank you, that sounds like just what I need, but I have no idea how to create or use profiles. Can anyone point me in the right direction?

What is the best way to do this automation? ?My goal is to have trains start from a yard, one after another, go the whole layout and the park back in the yard and rest about 10 minutes. ?I hope to

Hi Pete and thank you, thank you. You spent a lot of time on this...but...theres always a but. When Cov Hoppers are taken to the Interchange they will be *empty*. When they turn around thats when the

Steve, Yes. That’s the next step. It got pretty late last night by the time I posted, so of course, woke up in the middle of the night going why not post this to the NCE group! Your note

Check JMRI Prefs and connection tab see if the com port has changed ? Jim K

Anyone able to answer my questions - See original message. -- Phil Hartung Idaho Falls, ID

Different versions of JMRI don't require different device drivers. That's strictly an issue between your interface device and the OS you're plugging it into. For example, my interface device uses a

Hi, This thread brings up another subject/option. We were/are having some DMX-512 issues at church, so I was looking into the protocol. Naturally the next thought was can we do this over LCC with a

Glenn, Have you checked over on the NCE-DCC user group on Groups.io? You are a member there under this e-mail address. The crew over there has provided great support over the years for NCE

@BobJacobsen - not sure if anyone responded. We are using a 716 (and a 168) - and have the latest version of JMRI and can install test versions/etc. What do you need to write a decoder definition for

Hi,? ?I'm new here, mostly because my Decoder Pro and NCE system(s) have gotten along well for years through various computers and upgrades...now I've hit a wall, so any insights

This looks like exactly what I need. To answer Inobu One, I am using a service called Voice Monkey, so they are managing the API, I am not setting up a direct connection. So yes, everytime I make a

Thanks Mike and David for suggesting use of Time Machine. Will give it a try. Dave S. - I do not use PanelPro, only DecoderPro. Currently running test release 5.11.3. Fran G.

Yes use Time Machine on a SSD drive, I use it for my backup and just changed from a 2015 iMac to a new Mac Mini. Started the Mini up and migrated from the Time Machine drive and a few hours later had