开云体育

John, The profile/profile.xml would be helpful. It has the CMRI configuration. Dave Sand

David, I should point out that the main purpose of this revision was to remove many of the virtual blocks and sequencing logic at crossovers. I found in a smaller test file that by using turnouts

I have uploaded the file along with some of the other resources. Let me know if I missed something. John Figie

John, The messages.log file is normally 1MB which rolls over. Since you are running 5.6, that is about the time the logging technology was upgraded. When you move beyond 5.6, the 55MB file will

Thanks much for your prompt reply and help on this. The messages file is 55MB so I just uploaded a small snippet from the end including many sessions. Please see comments in the

John, To expand on Ken's reply, I recommend that you upload the messages.log file to the group's ProblemsBeingWorkedOn file folder. This will provide the details of the problem along with a history

John, You'll have to provide the full length of that traceback. That's only showing where it failed in a Java utility. We need to see where it was leaving the JMRI code. -Ken Cameron, Member

I have a large layout editor file that had been working well , but we wanted to make improvements. After a number of editing sessions I now get an error when opening the layout editor file. The panel

I have changed the decoder of a locomotive already in my JMRI roster. Is there an editing function to change the decoder listing without re-making a new roster for that locomotive? Thanks William

From Dan B.: *The "day" can be anything.? You can create "Day Shift", "Night Shift" and "Graveyard Shift" when creating train schedules.* Wow, that's a game changer!? OK! Thanks for that insight

Running JRMI on Raspberry Pi 3B+ connected to NCE PowerCab. Everything works fine under JMRI 5.8 with no error reports.? After upgrading to JMRI 5.10, I get the following pop-up errors when starting

On my previous layout I bought 24 BXP88 for train detection, they worked at first and later we couldn’t detect when we had a problem or not. I had an expert for train controls and he also couldn’t

There’s no decoder definition for the BXP88 now. Were I to create one, would you be willing to do some testing of it? I don’t have a BXP88 to do the testing myself. Bob — Bob

Dave, As of v5.11.2 both the DS74 and the BXP 88 are not supported yet by JMRI that I could find. [email protected]> wrote: -- John Griffin The Hostlers Inn

Dan, Thanks for the info. I give my operators a train manifest (like the pdf linked in my original post) to simplify paperwork. One sheet...one train. My little railroad doesn't justify a bunch of

I am in the process of installing DS 74’s into my layout. I would like to know if there are any updates to the JMRI software that allows the base address of the DS 74 to be changed. I am also

Ken, The program actually does show the loco setout at then end for local switchers.? Not so for regular trains.? The thinking is that the road locos aren't used at the terminal for setting out the

One of my operators asked if there is a way to have the loco Setout line moved to the end of the work to be done at the terminal location. On my manifests (and it has been that way for 10+ years) the

I’ve missed it in the thread. Is your WiThrottle server computer attached via WiFi to the network, or via a wired connection? If wired, ignore the rest of this post. Some WiFi networks are setup

Thanks Steve [email protected]> wrote: