开云体育

Thanks Pete for both ideas.? ?I really don't want all the tracks at one location at the same probablility, so I think its time I learn more about Schedules to see how that might influence moves. I

Phil G, I only did the list 1 to 8 as Nigel, layed out and moving from programming/main track. This new way for me i first DCC, along with JMRI, seen many youtube videos, but none have said, (do each

Pete, Took me awhile to get this figured out but this worked. Not sure how it happened but everything seems to be working now. Thanks everyone for the help. Gene

That's JMRI's "new"er CTC solution, as opposed to several older JMRI pieces that can be used as part of a CTC solution with _lots_ of extra "work". It can produce something "like" a CTC

Lou, Create a LRoute 1. Go to "Tools -> Tables -> LRoutes". 2. Click on "Add". 3. Select the "Actions (output)" tab. 4. Check the "Include" checkbox for any item. One is needed to create the

Ditto

That's a good idea Steve. All the suspected blocks are tournouts, so it is quite easy to overpass them. So, what can I do ? Is it possible to have a section composed of a turnout and a main

Jay, I recommend that you look at the CTC tool within JMRI. The help page is at https://www.jmri.org/help/en/package/jmri/jmrit/ctc/CTC.shtml There is a tutorial from five years ago at

Thanks Heiko, for finding that! For my image, I have now removed FireFox and installed Chromium. --SteveT

Good to hear there is positive progress. The purpose of doing things in tiny steps is to find the problem. Once there is more confidence that steps are working correctly, then it should be fine to

My situation is I presently have a working, so of, CMRI CTC.? However the person that wrote the Visual Basic won't help fix some of the problems.? So given the investment in hardware I plan to use

Jean The most likely cause is your train has moved into the next block before it was allocated, such as not stopping in the block it was ordered to stop in, or simply going faster than your sensors

Dave, how do I set up the logix initializer? That sounds like exactly what I need - I just need something to set the signal to a known aspect when I start up panelpro. Thanks Lou -- Modeling

HI, I have a lot of these warning: 15:12:46,579 jmri.jmrit.dispatcher.DispatcherFrame WARN ?- [BR-218 / Bypass - Bypass CW]:CheckAutoRelease release section [T1] failed, train has no occupied

Great news Thanks for letting us know Out of interest, do you know exactly which step helped. It may help others Phil G

Thank you all that has helped with this post following Nigel, last post above I now have it work and the lights work too, I will hold off changing any more settings but will now remember to only

Jay, The basics are still true, but the subjects change as the world of electronics moves along. Most modern electronics is peer-peer, including the new NMRA LCC standards, so my later clinics

Yes. I've seen him post to this group on a LCC thread and on a signaling thread in the past week. Generally, yes. Specifically? Probably not. JMRI has changed in various ways since 2000, so

I know Dick is still at RRCirkits. I talked to him last week. Dick's contact info is on the RRCirkits website. I have found him very helpful. Stephen Marler

No, but …. /g/jmriusers/message/193627 -- Ken NYNH&H, Old Colony Division, Cape Cod Branch (1949-1959) Loconet * JMRI 5.11.1 * OSX,Win10,Ubuntu Blog: Cape Cod Railroad (HO) –