开云体育

I have uploaded my file. In an effort to setup a new engine, I some how messed up my connections. I created a new connection for my Power Cab, which is only used for programming on a program track.

Dave Sand: ?Thank you for the response and very helpful information. ?After digesting your suggestions I now better understand the influence of speed in "our Aspect" selection. ?They also prompted

When a train is a turn, the train's name doesn't change even if the lead loco is swapped at the end of the branch.? Not sure why you would need the consist name to change, you don't need to show it

You can start here: https://www.jmri.org/help/en/package/jmri/jmrit/operations/Operations.shtml#BuildlocoConsist Dan

I'm not far enough along on my layout to test this yet, so I'm just trying to figure out how I'll eventually handle this scenario. I'd like to configure a train to: * Start on the departure track in

Thanks for the answers to the questions.? I will probably use multiple icons overlayed on each other to show the turntable in different positions. I have used the multi-sensor icons for the

Hi and thanks for your answer. I recently discovered this article, but there is no visual example, particularly on the path function. It's not easy. For example. Do you have to include a

John, I downloaded the file that you uploaded and it runs fine. Since I am using a simulated LocoNet connection, the turnouts and sensor work fine. The LocoNet simulator has an option to set all

File uploaded. I see it in the "To Be Worked On" folder but I don't get anything when I try to open it. John

John, Upload the good file to the group's ProblemsBeingWorkedOn file folder. Dave Sand

Dave, I followed your instructions. The "good" panel loaded, however, when clicking on turnouts on the panel to "light up" the signals from all showing a red aspect, only a handful changed to what

John, Do you have a file loading automatically using a startup action? If so, go to "Preferences -> Start Up" and delete it by selecting the action and clicking on the Remove button. Click on Save

Mickey, Start by following the steps at https://www.jmri.org/install/MacOSX.shtml#debug What type of Mac, Intel or AS? What macOS version? Dave Sand

Welcome to the club. I've had lots of 'fun' getting things to function the way I thought they should in respect of signals and train speed. The signal system will impact how speed changes (or

What cable do I use to connect PH5R to a Macintosh. I have tried using a standard USB cable but it doesn't come up in the Settings. Mickey

I started here, it's old but little has changed. www.rr-cirkits.com/Clinics/Clinics.html Look for this section on the page and select the links from there. -- H.O. Australia (Layout in

Short of it .. I have tried to set up the Camera Web Throttle, using the process shown https://www.jmri.org/help/en/package/jmri/jmrit/webThrottle/CamerawebThrottle.shtml but with my own web cam

I just looked at the "...Aug20-2-24" panel file in Notepad. It does have the <?xml version="1.0" encoding="UTF-8"?> in line 1. What do I do with it next?? Sorry for all the basic questions.? File

John, How are you looking at the file content? For Windows, NotePad++ is a good xml aware file editor. Dave Sand

When looking at the BackupPanel folder, I don't find any file that has <?xml version="1.0" encoding="UTF-8"?> Am I looking in the wrong place? John