开云体育

Ken, it definitely IS a NCE USB device. So if I understand you correctly, ?I should have another try at installing a driver. I shall try this later and report back Terry Metcalfe

Thank you for reporting this. It's probably a mistake in the decoder configuration - the ESU function output configuration is a lot and I'll need to spend some time on it to update JMRI to match all

JMRI DecoderPro decoder definitions ESU LokPilot 5 Micro Next 18 We cannot open the "SERVO" option for outputs 3 and 4 The "SERVO" options are available on outputs 11 and 12 which do not exist on this

If you can serve your site on port 80, Cloudflare's free level can provide an SSL proxy for your site. See screenshot.

Yup, here it is: /g/jmriusers/message/227611 In that case it was a USB-Serial adapter being used to connect to a PH-Pro, but that adapter used the same CH340 chip that is at issue

Terry M, Well that's clearly not a NCE-USB device. It may be that both parts of the driver are not installed for the NCE-USB. One part deals with it at the USB level of device. The second driver

EN-Tact, If you see the offline indication, that means the command station is not responding to commands from JMRI. -Ken Cameron, Member JMRI Dev

Dave, Post the link to the page you were downloading from so we can check it out. I had said about 150M for the size. -Ken Cameron, Member JMRI Dev

That tells me that what is on Com4 is not your USB Interface and that the computer is not seeing the USB Interface. I'm thinking it's a driver issue, drivers needing to be

Some how u have to place an ssl certificate.

Ken, Dwarf signals are typically used in low speed applications, so a dwarf green would be Slow Clear, and a high green Clear. This could be done with a dwarf on the siding and high signal on the

Peter, When my laptop was attached to the USB interface, the Device Manager indicated under Ports “Intel Active Management Technology - SOL (COM4)” When uncoupled it indicated the same message?

Many thanks Peter

What do you want to do? How do you want to configure the web server?

Will do, thank you. Appreciate all your work on JMRI and WiThrottle.

All, I've no idea why those lines were commented out, but I will create a PR to put them back. Sam, Thanks for catching that. It should be fixed in 5.9.5. I'll update here when a developer version is

Looks like it was commented out in this PR: https://github.com/JMRI/JMRI/commit/d2f4e90bac05defbdc24c7ca64aab07c33034318#diff-5c8fcfba7d2f4d11ff755c504095496a6444a6b46b26c72953835fdce6e76228

Steve, It appears that StateInconsistent is commented in the properties file. jmrit/withrottle/WiThrottleBundle.properties:#StateInconsistent = Inconsistent Dave Sand

Sam, Thanks for the detailed info. From this, I can see that it is not a firewall issue, as your client connects. But the WiThrottle Server is crashing with this message: 11:49:34,791 ptionhandler.

Sam, The following entry from your log with 5.9.4 likely shows a jmri problem. WiThrottleServer will be dead at that point. Hopefully one of the devs will take a look. Robin Robin