开云体育

Any sound decoder will require specialised hardware from the appropriate manufacturer to load sound files into the decoder. But JMRI can program the CVs of any decoder through an appropriate

This may well be because the original coding was to connect to the CS1 which did not have the alternative protocols available. It may well require modification to enable DCC mode for

I have been using Decoder Pro for some time now.? It is much easier to use when it works but lately, it is a headache. I can put a locomotive on the programming track and it will tell me the

I thought of that.? That is a good idea. -- Tom

Brian, I doubt that LogixNG will ever supplant Logix. However, Logix will probably never be enhanced. All new capabilities will be done in LogixNG. It is designed to be extended. For example,

Hi Dave, Your solution works fine it is the correct way. Thanks for your help. César En viernes, 5 de mayo de 2023, 22:28:56 CEST, Dave Sand <ds@...> escribió: César, Try

César, Try this crazy idea. Remove Invert from the linked turnouts. Set the "Continuing Route Turnout State" for CanvV6V20 to Thrown. This makes the diverging leg be the Closed position. Remove

They both end up with the same logic. Logix is a traditional function configuration (like that which used to be used in Programmable Logic Controllers). LogixNG is a language construct similar to

For a new installation, is there any reason to use logix as opposed to logixng? It appears that NG is intended to (eventually) completely supplant logix, so probably the answer is no. However I

Hi, I will try to show it by images. I have this layout. You can see the signals SAL2O( text above the signal) and S2/6 ( text next to the signal) that text is next to them. Also there is involved

César, We will need a least a picture of what you are trying to do. The best approach is to upload the xml file to the group's ProblemsBeingWorkedOn file folder. Dave Sand

Hello, I have detected and issue on the signal mast logic or at least I have the problem. It is related to turnouts that are connected. I have two turnouts that are directly connected one on closed

YAY my Ethernet shield showed up today!!……….now what? I have two groove 125khz sensors and an uno. I plan to buy more sensors in the near future. Can someone please provide a step per step for

Lawrence, DecoderPro is basically a very smart throttle connected to your DCC (or other) system. What matters is whether your DCC system and the decoder in question will play nicely together. If, for

You could simply "pool" all of your C/I tracks at that location.? Now if a certain destination C/I needs extra track space, it will steal it from the others.? This way your cars will be blocked by

Hello again, I currently have a yard where I have classification/interchange tracks set up by location, which works ok.? What I do find is that this restriction does reduce car movement, which is

Hi Dan/Pete, Makes total sense now.? Thank you for your help. -- Tom

couldn't he print the switch list without hitting the "move " button? I thought I printed a switch list just after I " built " the train. I can't test it now my computer is down and will be for a

Are you saying decoder pro has no issues with ANY brand sound decoder?

I had a look at the source code for turnout control (MarklinTurnout.java). Since my experience with the source code of JMRI is somewhat limited, I may be missing something, it does, however, look as