颁é蝉补谤,
We will need a least a picture of what you are trying to do. ?The best approach is to upload the xml file to the group's ProblemsBeingWorkedOn file folder.
Dave Sand
----- Original message -----
Subject: [jmriusers] Signal Mast Logic #signalmasts #turnouts
Date: Friday, May 05, 2023 2:29 PM
Hello,
I have detected and issue on the signal mast logic or at least I have the problem. It is related to turnouts that are connected. I have two turnouts that are directly connected one on closed position and the other on throw. On the configuration on the turnout I linked both turnouts and I selected to invert the second one. It worked perfectly so both turnouts are paired and when route is established at them goes straight and in the oposite position goes to another path. When I used the discover to establish the pairing signals all goes perfectly but when I tried to work always the signal is on danger. I forced to change aspect but it is not the correct way. When I analysed the signal mast Logic I released that turnouts aren't correctly. Both where considered as throw instead of one throw and the other closed to be active so it is not possible to link them. If I didn't put this link the pairing is correct with the Signal Mast Logic that is the way I did actually the configuration.
I am using JMRI on its 5.2 version so it is upgraded until last production version, is it a problem on this last version or it was also on previous versions?
Best Regards
颁é蝉补谤
