开云体育

Thanks Dan, I think that concept may work Manifests for Engineer Bob and switch list for Yardmaster Fred now to have look/play Ron

Steve, I will be adding the control sensor to the script. It will be optional and if one is not specified, the behavior will be the same. I find it useful to single step the block process independent

Dave, Thanks for the update. Please keep me posted re your progress.I can try the change per above. Will this impact track tracking if I choose to implement it? -- Regards Brendan Dennis Melbourne,

David, As long as you do not have 4.16 it should be working OK. Make sure that: a) The command station is ON. (this item covers some percentage of my tech support calls, so I have to ask) b) The

Mike, The usual purpose of signals are: what's ahead. This is either continuing track or a turnout. Next is that signals usual are at some block boundary. The reason is you are looking ahead, and the

Hi, I am a UK modeller new to JMRI and whilst I have managed to get going fairly well, I am now bogged down in JMRI help death by circular cross reference. I simply want to add occupancy blocks taht

I am using 4.18 would I be better off with latest trial version? David Brown

Dave thanks so much for taking the time to explain this to me.? I will start playing with this and report back. It makes sense what you are saying.? I will also look to the crossovers as I do not

David, Which version of JMRI are you using? 4.16 has a baud rate bug. Switch up to 4.18 if you have not already. Dick :)

Tim, There is a bug in the Section crossover logic where it finds an error but does not create a system console message. A crossover always needs at least two blocks. This allows two trains to use the

Ron, as Dan pointed out, i think of the term Manifest as describing the work a Road Crew does with his train and all his work locations. ?A Switchlist describes work at one location. ?So for my Road

That change sounds useful, but I haven't found it necessary for my debugging as I just pause the autotrains using the Dispatcher windows. I also have a button on the PanelPro main window to (re)start

I've been building a new panel in CPE and when I go to the item palette and chose the sensors tab the page comes up blank. All other pages come up like they should ie: indicator track, turnouts ect.

Hi Ron, I try to use the term train "Manifest" as the document that shows all the work a train needs to perform.? With a Manifest there isn't a need for a switch list.? A switch list is the document

Ken, Thanks for your response. LT201, LT202, LT212 are crossovers. LT203 and LT205 are turnouts arranged as a crossover. All the rest of LTxxx are turnouts. I do not believe I tried to change any from

David, Your suggestions worked, all the turnouts are operating and displaying as expected. Thank you very much. Did my explanation of the blocks for the turnouts and crossovers make sense? I did have

John, I have commonly experienced three different problems when moving panels between computers. 1. Custom icons must be also available on the new location (I have a folder called resources where I

Thanks Steve, it was staring me in the face, so obvious now! All working perfectly now, I inverted the CBUS turnout table setting but will change the setting in the panel as you suggest otherwise I

I have that fixed I believe, still getting 7 errors.? It sense to check the Console Log.? Where is that? Here is what I did.

OK, so I have a freight train made up to depart hidden staging to be driven to Station A by Engineer Bob , set out & pick up box cars, etc then to station B which is main station that has Yardmaster?