开云体育

I've come across a couple of scenarios where the web panel becomes inconsistent with the native layout editor panel: * After hiding a sensor (or other icon) * NX route allocation route colouring I've

One more detail, the initial setup and adjustScrollBars() use 2 different names for the scroll bars- the initial setup uses hsb and vsb, whereas the adjustScrollBars part uses horscroll and verscroll.

Bill I tried this and it worked for me. I used the LH-Xover, 2 separate addresses, not inverted. All six routes thru the Xover worked. Steve G.

I’m an European model train user and relatively a new user of a Sprog/ Decoder pro for roistering my locomotives. In the past few years TRIX change their programming of their HO model trains. The

Also, unless I misunderstand, on line 9066, it should be "rectangleToRectangle2D", not "rectangle2DToRectangle", since the variable being defined is a "rectangle2D".

George, There is a link to the panel xml file in the first post. The xml data looks good. T8 is connected to SL1 using type 24 (point D). And SL1 connectdname is T8. The problem is that getTurnoutList

I think I may have some new information regarding the long-standing glitch that makes it difficult to use large layouts in layout editor due to the tracks getting clipped off when zooming out. It

If you want to send me your layout file I can track it down. (it may just be a bug… in which case I'll add fixing it to my queue… ;-)

This is caused by an?LayoutTrack object?that says that it's connected to a track segment… but the track segment doesn't?says?that it's connected to the LayoutTrack object. (The error *should*

I don't see a way to do this without a schedule. Schedules are not that complicated. In the random section select 1(%). That should give you about three deliveries a year :-) -- Stefan Bartelski Home

Thanks Dave. Like you say, that method gets rid of the errors, and it shouldn't be a problem on the layout, as that section is relatively short anyway. I was keen to get rid of the errors as I've been

Read the documentation [RTFM? ;-)], it is very easy to do, I have done it a number of times for my own small roster and for friends. With the ESU decoders it is often better to do a Read Sheet on the

I've been trying to reproduce… to no avail… can you provide the explicit steps to reproduce? (I've added it to my (LONG) queue to look into highlighting where connections can be made while

I had a similar problem in 4.17.8 - see my message thread 167074.? The gist of the problem is that something in the Consist.xml file created by an earlier release breaks WiThrottle start up. -- Dale

Taking another look at JMRI Ops after about 8yrs. of CC/WB.? I am interested in knowing how folks, particularly those running longer over the road trains, are working their classification yards.? I

Andy, I have not found the problem yet but I did come up with a circumvention. If the CrossoverCDSlipBlock block is extended down to ABSlip, then the errors do not occur. I don't know if this causes

Thanks for everybody help. Over Christmas break I have been able to get 10 routes programmed and working for my staging yard. Wayne Snyder

Hi I've been building up a layout editor panel, adding NX routing and signal masts and have come up against "Connectivity error when searching turnouts in Block CrossoverABSlipBlock" errors when the

Hello Group I have my control panel set up under Layout Editor, and thanks to the considerable help freely available from this group I have it working mostly to my satisfaction. I use the Digitrax DCC

Adam, I'm trying to get my view of the signals. That picture has what over here would be five masts. Your text says it is really two logical masts, at least it is only two tracks, correct? How does