开云体育

Jim, You have a single track so you have to protect against the train in B1 moving into B2. To do what you want I think you’d have to add directional logic. Others may know better. Robin

Hi Dave, Just want to verify that these are the correct drivers, as I am using Windows XP, not Win 10. Peace, Mike G.

Hi Andrew, It seems you passed the first hurdle - communication between command station and computer is now apparently there. The second hurdle may be a very small one: if you are trying to read a

Have tried jumpers 2-4 both ways (all on-all off), and when I go to add a locomotive and read from, i get the error 301-no locomotive detected. Stuck.

Hi, not sure if I have a problem or just a complete lack of understanding of signal masts. I have a very simple panel with 3 signal masts and two blocks Sm1 sm2

Did now find a cable and/or driver that seems to be working, though still having troubles (red light coming on, etc). ?Can someone Mac’y please confirm the jumper positions? I’ve gotten two

Total newbie, am having lots of trouble getting JMRI to work with my NCE PowerCab/USB Interface. ?I am hoping that if I give you all my specs, someone will be able, from experience to pinpoint the

Fixed, should be in next test version. Michael Mosher Member SFRH&MS http://www.atsfrr.net/ DCC Master PVSMR http://www.patcongvalley.com/

Dave, What changed about 410 seconds after you started JMRI that allowed JMRI to see the command station? It does 10 second cycles to try to talk to the command station. It times out at 10 seconds.

Marc, Good spotting. I probably didn't scroll to the end of the log after seeing so many timeouts. However, the fact that it took so long to reasons is concerning. It should have responded

If you want to be able to gang switch to the opposite states also… then yes.

Dave, Does this not mean the driver is ok and loaded :? Last 5 lines of his log 458429 jmrix.AbstractMRTrafficController???? WARN? - timeout flushes receive buffer:? [Receive] 458440

Yeah... I figured I needed to retrieve as much debug information as possible. It is a bit bothersome gathering that sort of data as we run trains for the public.? I will be on site Thursday and will

Mike, Good. I can now give you the correct instructions. NCE USB Setup Windows - The NCE USB uses the SiLabs CP2102 chipset. Download and install SiLabs CP210x drivers from

Dan K, One useful trick is to have the console open, it may show errors related to loading the panel. Now depending on what is happening, you may be able to click Help->System Console, do that in any

Why don't I think of things like that!!

Go to the NCE site, there you can download the USB manual and get the info from "the horse's mouth" so to speak. John

O.K. The the correct connections are: Power cab plugged into the adapter panel in its usual socket and the USP adapter plugged into the socket right next to where the power cab is plugged in on the

Yes, that is what it was designed for. John

Is the NCE USB board usable with the Power Cab? What I do not understand it that a couple of years ago, I was reading the parameters from the decoder and modifying speed steps using this adapter.