Is the NCE USB board usable with the Power Cab?
What I do not understand it that a couple of years ago, I was reading the parameters from the decoder and modifying speed steps using this adapter. What it was plugged into, I am not sure now if you say I can't do that.
Anyway, I will pursue other adapters.
Peace,
Mike G.
toggle quoted message
Show quoted text
On 12/16/2019 3:35 PM, Dave Heap wrote:
Mike,
On 17 Dec 2019, at 4:49 AM, emrldsky <azMikeG@...> wrote:
The OS is Windows XP, and the usb is the NCE adapter. This all worked a couple of years ago. Maybe dust overload? :-)
If you are using the NCE USB board with your NCE Power Pro (plugged into the cab bus), you'll never be able to program locos.
You need a third-party USB-Serial cable (such as the one ESU sells as a spare for its LokProgrammer hardware, or the similar FDTI-chipset based one from RRCirKits), plugged into the 9-pin serial port on the metal Power Pro box.
No point further logs or speculation until that's resolved.
Dave in Australia
