开云体育

Yes, the web server and Withrottle are two different things.? I use Android tablets to display panels via the web server and it works like a charm.? You can either use a standard browser, or you can

Don, You need to start the JMRI web server: PanelPro Tools >> Start JMRI Web Server The default port for the web server is 12080. I believe there can be an issue with the Android version, someone else

I am quite new to JMRI, and newer to using the Raspberry Pi 3B+, so this probably is a "dumb" question (I prefer "ignorant", as that can be cured!) I've loaded and installed Steve Todd's JMRI software

Wayne, Conventional English understanding would make you think that a 'Shorted' LocoNet would be a bad thing. However it just means that pins 3 & 4 are both connected to the LocoNet. In fact this is a

Jim, The document at this link may be helpful: https://ncedcc.zendesk.com/hc/en-us/article_attachments/360012797794/Speed_Matching_DCC_Locomotives.pdf -Dan

Jim, What decoder(s) are you using? Are you using ‘Basic Speed Control” or the ‘28-Step Speed Table?’ Ross Sent: Sunday, August 18, 2019 2:54 PM To: [email protected] Subject: [jmriusers]

I have 2 Kato locos (same model). One starts moving at SS 1, while the other doesn't move until SS 6. What is the best way to speed match these two?? Thanks. Jim K

Thanks, Dave. That worked fine, Jim K

Roger Yes and No. It will not run into other auto-dispatched trains, or manual driven trains that have been dispatched and the driver is obeying all signals, or a manually run train that is being very

Jim: OK thanks. As is often the case, misunderstandings stem from vocabulary. I know your "pads" as "tabs" (like on file folders in a filing cabinet). Anyway, I guess your basic question has been

All, While dispatcher is running two auto trains, does the program watch the sections or the blocks to avoid running up on another train? Roger

?????????????? mel perry [email protected]> wrote:

Dave, I finally got around to doing this and it works good! Thank you, Jasen Jasen

Here is an example from my layout that causes this message. The panel definition is retrieved using ?format=xml, my example here:

Jan, When I am on the functions pane, there are function "pads" along to top. Jim

Gary, Concerning your last question, folks will argue both sides of that coin.? Both have pros and cons.? If you are worried for some reason that your car database will not match the layout, print

Wayne, All Digitrax DCS's (and the DB150) can be a CS and booster or as just a booster only.. -- Peter Ulvestad JMRI Users Group Moderator - http://www.jmri.org ( http://www.jmri.org ) Tam Valley

Thanks Peter, I was scratching my head trying to figure out how it was working as both a command station and booster if that was the case. Wayne

sorry after 8 or 10 trains work the area Matt G

I would be curious to know if everything continues to run after 8 or 10 work the area Matt G