开云体育

I have never heard of this particular sensor. Can you point to any documentation on it? I am having some trouble deciphering this statement. There are three different monitors involved here: The raw

Hi All, I forgot to add to my original post, that i am using Java 1.8.0_211 and that reading Soundtraxx Decoders works just fine on the same programming track, in this case an Athearn Genesis SD70ACe

Hi All, I had one thought, could this be related to the firmware version contained in the LokSound Select decoders themselves, not being at a level high enough, or the reverse, that the firmware level

Hi All, I am having some issues with JMRI for the first time while I have been programming a Loksound Select decoder as part of using the Read type from decoder function. I am trying to standardize a

Hi. I have JMRI PanelPro - Z21 - MGB sensor (loconet). All feedback works except the feedback from the sensor when a locomotive passes the block. The feedback that does not arrive I can see the log on

Travis, also get the MQTT broker running with verbose output that you can see. Mosquitto has an option to include a configuration file that can help with this. (I had two JMRI instances running and

Key is right after the crash, before starting JMRI again, the session.log is the last words of the system. Now it is also the last entry in the messages.log.1 file. If you had started JMRI again, then

Thanks for all the advice guys, very helpful to get such helpful and good advice so quickly, I know where I am now!

David K, That's a further clue. Were you opening one of the new LokSound 5 decoder models? These need 512MB of Java Heap Space (over 2,000 CVs and around 10,000 individual settings to configure and

In at least one or two occasions in the dim past, when the JMRI program quit suddenly, there were several extra lines of information in the session.log file than there were visible on the JMRI System

Ken, Peter and Marc, thanks for that info about the Soundbug not having CV conflicts with Digitrax motor decoders. Makes sense!? Hopefully the case for Jim. I had to use the long and short address

Steve, You wrote "Can the DS64 contents be read from JMRI? If so, POM or programming track?" "Yes and no". JMRI does _not_ make use of either "service-mode" programming or "programming on the main".

Got it Dan.? Thanks for the clarification.? I must have fat fingered it at some time in the past.? Everything is working as expected now. Dave...

Dave/Ken, I will look at the size and capture logs tomorrow when I head back to the club. I don’t believe we are using pictures but will check. I will look to see how many entries we have. What I

David K and Ken, Yes, I now remember that case and the cause/solution (rescale the images). I also helped a user whose JMRI would start (and open the System Console as a startup item) but it would be

David, We need two things: 1) Go to the Help->System Console menu item, click Copy to Clipboard and paste that into message for us all to see.** 2) A clearer explanation of what you did than "can pull

David K, My memory recalls some issues where there were a lot of roster entries and many with large pictures. The effect was a Java memory error because it was trying to process every roster entry,

Looking for advice on what to do on a PC that is used only for programming locos. I only upgrade it to the production versions so last month I went from the version last Dec 2018 to 4.16. The machine

Dave, The default is for "Truncate" is disabled.? Note that the truncate option only applies to locations that have switchlists enabled. Dan

Frank, All CVs are reset by an ESU (JMRI Program Track->Resets menu). Once you've Reset, Read All CVs as per my earlier instructions, saved and closed the roster entry, you can: - Reopen the saved