开云体育

Hallo, tried to reset ESU Lopi 4 and got that message above. Apparently the values were resetted though. But what does that message mean ? Thanks and regards Joern

Blocks are not directly supported by Logix. You have to use the assigned sensor to represent the block in Logix. Dave Sand

I'll add that the driver was updated in March 2019, so you likely need it. I downloaded and ran the installer. Then when I connected the hardware it went through a couple of cycles (watching the

Hi,? for various reasons I opted to use IR sensors for detecting where my loco(s) is on the track and for block occupancy,? not realising (because i'm new to this) that JMRI seems to only be able to

Doc, First, please say 'which latest' version of JMRI you are using? Second, use the Windows Device Manager to discover which COM port the NCE-USB is using. Do this by having it open as you plug and

Hello @ all! First of all thank you for the interest spent on my problem :-) JMRI is OK! It seems that the problem comes from the shield ethernet, I removed it, passed in serial connection, and in

For months, my ho Club layout has been experiencing difficulties with NCE and JMRI. We have a Power cab with a Sb5 power source and WiThrottle and Apple phones. JMRI shows the phone connection and the

O/S Win10 PanrlPro 4.15.6+Red1ceb2 DCC system Digitrax Zephyr Express for accessory control, Zephyr for Detection, Gaugemaster (MRC) Prodigy 2 for loco control I'm trying to build a logix table for a

Great. Those two things could be related. Unfortunately, there are commands the elite doesn’t send an XpressNet reply to when the XpressNet protocol documentation says it should. We have special

Hi Paul, I tried the new version and it certainly has made a difference. The system will now connect and talk to the controller. I was able to control a train and power on and off the system although

I'm sure it does, Dan.? I came across the issue when I was trying to compare accept/exclude loads and car types for a train.? Any chance you could do a .CSV dump of the data like you've done for

I need some help understanding, using and applying these 2 topics. I am thinking that I & O are yes or Know Jerry Hampton

mike if it did not work try cascaderwy at yahoo dot com matt

Mike this stupid box won't let me follow the email addy my addy is cascaderwy@... Matt

Matt, My email is mkisser@... let’s take this off line. I am glad to share more of what I have done. Maby we can work together to help each other out. Mike

Thanks Mike, So there are 2 double ended tracks for trains, 7 single ended tracks for car storage, and then an actual loco and caboose tracks the number doesn't matter as long as they will hold the

Hi Jon, Try looking at the operation train xml file (OperationsTrainRoster.xml).? It contains everything about each train. Dan

Rizwan: A good resource for sorting out how Kato turnouts work electrically is Alan Gartner's http://www.wiringfordcc.com/switches_kato.htm. The discussion is around a turnout being "DCC friendly"

Sorry I think I missed an earlier email. Which prototype Mole is this about? Andy

Hi Matt, I took my “mole Yard” and split it in half and changed the tracks to “Spurs” and that got me a working solution I think. Q1 = Yes Except for the A/D tracks. Q2 = 7 total. Q3 = There