开云体育

Don, Where does your home brew sit in the following simplified Digitrax map? While this example is Digitrax specific, the basic concepts apply to most JMRI to layout connections. JMRI <-> FTDI Drivers

Dave, My railroad interface is home brew. I'm looking for a way to map the turnouts into a few bytes of data in computer RAM, where an interrupt driven interface will write it to a board to control

I'm not sure what you are saying here. Most operators actually prefer fascia static panels with HW push buttons? The tables were temporary fix and you are going to install fascia panels eventually? In

Hi Klaus I've added more to the post above now that I've had a couple more hours "playing" VSD.? I've added further comments in the body starting with SD> Thanks for the video.? Yes, this is exactly

We have a help page for this: <http://jmri.org/help/en/html/setup/Dropbox.shtml> -- Dave in Australia

Ranges as specified by the NMRA and as implemented by various manufacturers differ: For a fairly complete list, see:

Lars, I started with an old Android tablet which acted as a "proof of concept" if you will.? I acquired a couple ~7" Android tablets from my local MicroCenter? for $30 each that were adequate (one

Jerry, My recommendation for 'off-line' work on a layout is to create a profile at the other computer that has the same connections, but pick the 'simulator' mode for each connection. It will let you

Those of you who are responding to me, please read my post here at this thread.? Information being asked in the recent posts have been answered in my posts.? Although it may sound like I am being

I want to save my macros, but the save button is always greyed out. Sent from my Xperia by Sony smartphone

i am running JMRI on 2 machines. One is connected to the layout physically with USB interfaces. The other is remote, and is the one I use to design the JMRI panels. I have networked the JMRI files

Don, What hardware are you using to drive the turnouts? As a general rule, the hardware defines the turnout system name. For example, a Digitrax DS64 can drive 4 switch machines. The default JMRI

Cliff, Nice changes. I have made an additional change at line 20 to only get the LE panels. PE/CPE/Switchboard panels cause Java exceptions. I also added an export complete message at the end handle.

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the [email protected] group. *File:* Table print CA-DS.py *Uploaded By:* Dave Sand

Thanks Peter and Marc, Just the information I needed. using Dropbox is a great idea! Jerry Michels

Hi Klaus Thanks for the video.? Yes, this is exactly what I thought I should be hearing, but don't currently.? So this prompts three questions: Q1.? What do you mean by VSD in JMRI "simulator mode"

Hi Don, If Dave Sand does not answer this I will have a go tomorrow morning. Happy New Year to you. Dave Roberts

Dave & John, SUCCESS! I have three Excel files on my Desktop which I need to study in detail. I have resorted them, first by User Name and then also by System Name within the blocks of sub-panel

I'm progressing on entering my railroad in Layout Editor. I've set the track blocks and my names for the turnouts. When adding one, there's a dialog box for labeling its control signal. But, I'm not

Some script improvements have been merged into Dave Sand's excellent modification and uploaded to /g/jmriusers/files/Script%20examples/Table%20print%20DS-CA.py for your inspection.