开云体育

The solution I use is to recognise the difference between Layout Editor (which is a logical description of the layout), and the Panel Editors (which are graphically free-form control panels).

My query is to do with the icons we can use within The Layout editor to represent the various formations and the actual turnouts on the layout that make up the formation. I have several crossovers and

Thanks all!! I am using the NMP15.

Seth, I know what MQTT is and I know it isn’t own communication protocol. You are correct and I agree that putting MQTT offers huge advantages for everything. Chris

By the time I got there JMRI test release 4.13.6 was available so I have tried this. Now the add new icon with change icons enabled works as expected.? However edit existing icon still does not. I

Mick I had this six months ago - ended up totally deleting Java and loading a fresh download of Java. Worked OK ever since then. Gerry

I just upgraded my JMRI to 4.13.6, and I can’t now get it to write indexed CVS in a Soundtraxx ECO-100 UK decoder. Non indexed CVS are ok, but as soon as it hits an indexed one I get first a 308

Hi on my system ... Pi version ? PRETTY_NAME="Raspbian GNU/Linux 9 (stretch)" ? NAME="Raspbian GNU/Linux" ? VERSION_ID="9" ? VERSION="9 (stretch)" ? ID=raspbian ? ID_LIKE=debian ?

Thanks Dave. Part of the 4.15.x series is fine. The main thing is that the issue can be addressed. Nigel

Dave? I’m following this thread with interest after you convinced me to use LE as the medium to bring my CTC panel to life? Good progress here on activating turnouts with Tools Tables Turnouts and

Felice, All these NCE decoder share the same software, therefore the same CV set. The only difference between them is the form factor, but this cannot be known by JMRI. So you can use any that is

Test version 4.13.6 of JMRI/DecoderPro is available for download. This is the next in a series of test releases that will culminate in a production release, hopefully in December 2018. We're getting

When I was very young, in the UK, "Dead Rail" was the toy train technology of the day. AKA as "Clockwork".? Fortunately, as I got older, and the WW II aftermath austerity receded, "Electric Trains"

DecoderPro is showing that CV7 is 38 and CV8 is 11.

Chris: I think you assumed a critical step: MQTT is a service that you typically access via a TCP/IP mechanism, MQTT is not itself a transport mechanism like CMRI, LCC, Loconet etc.? OTOH if you

Jan,? That is not my argument. I know that MQTT will never replace DCC. I was just proving that it can be used to transfer data to a decoder via wireless communication rather than the rail. This is

Chris: Replacing DCC with MQTT seems like a solution looking for a problem to solve. An enormous advantage of DCC is that is standardized and supported by a large range of suppliers of many types of

Was having the same problem even with a booster installed. The advice I got from this group was to eliminate the booster. It worked like a charm. I was trying to program a new Bachmann 2-8-0 and

Neither adding or editing work. I will try again tomorrow with 4.13.7ish

Yes