开云体育

Good morning. After 4 hours of watching the lights blink on usb but not comms with loco, I loaded the exact same software and setup in a notebook, away it went. So at least determined no the nce

You certainly have some setup-specific issues. JMRI will uniquely identify any modern ESU decoder, except the Essential Sound Unit (because I can't complete the definition for it until ESU gets the

Hi Paul, Thanks for responding.? Here is my log.? I hope you can find something. Best Wishes Graham

Graham, Can you send me an XpressNet monitor log with timestamps and raw packets enabled that shows this? Hornsby choose to do things quite differently than every other XpressNet implementation and

Same for me.. definitely not ok or normal. Eventually the delays get so bad it shuts down. -- RockPro - San Diego, CA Raspi2 B+,?SPROG3, BDL168 & 10 switches on a 4x8

How much control does the layout owner have over the payload? I.e. can sensor data from layout to JMRI (almost always) be configured to match something specific? Or does JMRI need to be configured to

MQTT payloads (states) can be an integer, string, or even JSON. I think though if it can be done we should be using language that is easy ?to understand. Such as on, off, closed, thrown, etc.,

Dave, After locating the correct directory and adding an icon, the new icons would not initially show up in the CPE edit icon catalog. I then closed CPE and restarted it. After doing that, the

Paul, Custom icons are placed in the “resources" directory within the user files location (aka preferences). The JMRI Help >> Locations... menu item shows all of the JMRI locations. The User Files

I can locate the CPE icon folders, open and edit an icon in paint then save the new icon....but only in a folder external to the JMRI folders. I tried to save in a JMRI icon folder...no luck...says I

Jan, The Converter is already in Acrobat Pro DC. I am hoping that I now have them in Excel format. I will look at them in the morning. Dave

Many people use a Pi without a keyboard/mouse/monitor directly attached. The do initial setup and then network connections to do any further work later. So nothing else has to be near the Pi normally.

Bob J, From watching the conversation (I've not directly worked with MQTT), would the conventions of MERG or LCC work where the systemName entry is at 'something_on;something_off' pattern entry. So

Maybe the key is to add a row to the system table to place the mqtt topic there. This way the user can use what they want and the system can associate that topic to that turnout for example

I think you can also use a old iPad as a display and link it to your computer with the web server. Paul D

Craig: Absolutely..! Search on RPi-JMRI, DCC++ command station, DIY Arduino DCC accessory decoders... That should bury you for a bit... If you have a tablet or a PC near the train area you can access

When you say "detect" returns numerous options for loksound, I am not sure what you are doing. You should use New Loco then Auto Detect Decoder. And let it finish - dont jump the gun thinking it is

I don't have enough room in the aisles to have a laptop installed but I was wondering if I could use a Raspberry Pi with a small display to run JMRI?? If so could I also connect one or more Arduinos

This has been a big problem with V4.12. It is quite likely to occur if you happen to start JMRI V4.12 without your hardware connected. We've done a lot of hard work on this recently and it should be

I noticed when trying to program a locomotive using version 4.12, the NCE USB was not toggling? (red LED's did not illuminate. I went to preferences then defaults and noticed that Internal was