开云体育

Ken and Dan, Yes, we are running 4.12 currently.? I see that there is a 4.13.5 test release, but do not see a 4.13 production release (I see it might be a December release time frame though).? I can

Thanks Dave, All works fine now. Mike Canada Sent: Thursday, November 22, 2018 1:53 AM To: [email protected] Subject: Re: [jmriusers] NCE AUI Sensors not detecting active or inactive - timeout

Ken, Good catch, the NCE macro was fixed in 4.13.1. Dan

The prior behavior of the macro editor, while it was broken, fit your description. What would happen is it would effectively wipe the memory in the command station. What I don't recall is which

A friend is wanting to use an old Microsoft phone with Withrottle. Is there an app available for that? Regards Peter Pennycuick 0407916570

Which firmware version is the compact? If it has the version 3.2 firmware ( which I think was the last one released ) it supports consisting. XpressNet actually has two emergency stop commands. There

Mike, Those settings will get you into trouble with other features (like programming) The correct settings for a Power Pro system via the Serial Port are: - On the Power Pro, Set Up Command Station --

Thank you again. I purchased the serial to USB cable and had to buy a PD9 male to male adaptor cable because the Power Pro is a female plug and the serial - USB cable was PD9 female plug as well. I

Dave, Thanks for the info on the?NCE?Clear All Advanced Consists Command We obviously don't want to execute this now that we've rebuilt all the consists after the crash, but will keep it in mind

Dan, I agree with you on the fact that the command station crashed.? Trying to think of what else was going on at the time other than JMRI monitoring turnout status (all turnouts are set to

Michael, You can upload your panel xml file to the group’s ProblemsBeginWorkedOn folder. Dave Sand

I took a quick look at the rule set. I'm surprised that it has both a 'Approach Diverging' and 'Diverging Approach' defined. It implies within the definition that NW had two different signal rules,

Tom, When you say 'slow flash' on the node, is that the 1/2 sec on, 1/2 off, which would be normal for a node that received the INIT. Or do you mean the flash that says it never saw the INIT? Before

Upgrading from 4.4 to 4.10 breaks the script line: ??? self.panel =

Dave, so I created 4 signal masts to test out what you said. I can get them to change correctly by clicking them on the screen. How do I get them to work as the train moves through them? And how do I

Hi Tom, Quick assessment (probably wrong but here goes. 1. You do not have the correct comm port set up so the CMRI node can talk to the system. Check whatever Lumbutu uses to check what is connected

Just for grins, I changed the file appearance-SL-2-high-absolute.xml to include an aspect called Diverging Approach which was a copy of Approach Diverging.? I also removed the aspect mapping for

With the NCE Power Pro, the NCE recommended "Clear All Advanced Consists" command (Pro Cab, under Setup Command Station) is better, much easier, safer and more thorough than trying to fix things

Our club has a C/MRI maxi-node with a SUSIC, eight DOUT24 output cards four DIN 24 input cards. It is connected to a Lubuntu 18.04 system using a two port 16550 based RS-232 serial card. While I was

JMRI version: 4.13.4 and 4.12 Java version:?1.8.0_171 MacOS: Version 10.13 I've been working on a small physical layout connected to JMRI to understand signaling and LCC.? I've been using SML with