开云体育

*default options in jmri.conf

Tried increasing memory in jmri.com,?default_options="-J-Xmx768m", but that didn't help. Then noticed I was getting a stack trace in system console whenever I clicked. Does that shed any light? I

Doug, A lot of the information out there can be misleading. This appears to be the first time you have requested help. Below is a correct set of instructions. -- Dave Heap (a member of the JMRI

Ken...not sure I understand your statement. If you are asking if the extension method used for the loco roster would be workable if that same method was applied to the cars file, I would find that

In operations, the option is available for both yard and C/I tracks to select Normal, First In First Out, or Last In First Out. I see that the status of spurs is always displayed as Normal. Is there a

Jim, JmriFunctions.py is the source for the invalid properties that have been added to the sensors. The property is a listener that has been created to provide notifications of changes within JMRI.

Doug Are using updated drivers for windows 10. I been using win 10 with nice power cab and pro. Had problems with the pro system until I got a newer updated usb to serial adapter. Bob C

Well, I know Sudro is in the area. He's been a long time part of the Amherst Railway group that does the Springfield show at the end of January. I think he watches this list and may chime in. If not

Thanks guys. I will check when I get home and let you know. I do know that the leds on the AIU do light up as the locomotive moves across the layout. But wasn’t able to get anything to read on

Thank you Dave. Derek.

When I open up the "Tables->Sensors" I see many sensors (i have quite a few real sensors), but the ones that I added (virtual sensors) that are placed on the Panel (to form buttons) are missing. I see

Do you have a raspberry pi around? There’s an image you can download with auto detection. Connection for NCE Powercab and DCC++ Arduino both worked at boot with 0 tinkering.

Hi all - Anyone around the Amherst-Northampton MA area willing to help with JMRI Decoder Pro, in person? I could drive an hour or more if we set a time. I finally give up trying to get JMRI Decoder

Thanks but that doesn't work either. And I don't have this issue on an earlier layout with less sections so it just feels like the RPi is hitting an element limit for it's memory. Here's a picture (

In the NCE Command Monitor: - If all AIU lights are off the return value should be 3f ff - If AIU light 1 is on and all others are off the return value should be 3f fe - If all AIU lights are on the

On Linux and macOS, a control click will normally be more consistent in displaying the context menu. Dave Sand

Address Range If your Power Cab firmware (second screen at startup of your Power Cab, after the "Pro Cab V1.3" message) is: - "V1.28C" the only valid addresses for extra cabs are 3 & (unofficially) 4.

Hi steve, I think I have witnessed this once before. I have IR relays for stop sensors. Whenever this odd re-allocate thing happens I hear the relay fire but it doesn’t stop the loco because it has

Michael, Key things to keep in mind: 1. Set the right address on the AIU. 1.1. CS02/PowerHouse command stations, that usually means starting at 50 and working up from there. 1.2. USB based command

Both there now one called jmriTCPDeviceMgr.py and one called jmrFunctions.py Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 ________________________________ Sent: