开云体育

Dave, Thanks for your continuing help with JMRI Decoder pro And Lok decoders. Seeing what was read into the function pane was when i realized that somehow the sound file that I had installed was not a

Paul, ? There appears to be a situation when JMRI does not recover from these errors but continues to retransmit the ERROR and INFO message, eventually (in this case after about 120 attempts

Hi Rick, One thing I’m noticing with your procedure is that you download the file, then make changes, then test….. You should ALWAYS test BEFORE making any changes. This way you know if there is

Sent from my iPad I’ve made a few corrections to the reporter code that should help the situation. These are available in the current daily build ( package build 2685 as I type this

No, those steps were provided for you to see DecoderPro in the window title. PanelPro works fine in the provided image.

Bob, This may look like a conversation by lunatics, one of them says something, the other answers something else, except that there is only one lunatic here, me, commenting on, though not grasping

You said the roster was copied from another machine. Check the ownership of the roster files, and the permissions on the folder, within the operating system. Should be fully accessible to the user

Allen, Disclaimer: I am not a SSL expert, what follows is my understanding. The additional errors appear to be caused by SSL definitions that don’t make sense. If you look at the SSL for 3R,

If the Signal Mast is built using already-defined DCC Signal Heads, the offset is accounted for. I'm not an expert in Signal Masts, but if there is somewhere in there where you have to enter a raw

There is no Template for the Function Map in DecoderPro, for the reasons Tom explained. When you open a new LokSound V4 or Select roster entry, the entire Function Map pane will be blank. Once you

Actually i just type in the Function Labels from the print out from the web site.

The Function Labels are not stored in the decoder, only in the project file. -- Dave in Australia The New England Convention 2018 http://www.newenglandmodelrailwayclub.com/content/convention.shtml

Tom, Dave, I first want to say I appreciate your help. I did print out Daves instructions and your response. I would call this a cluster of sorts. I have loaded sound files into lok decoders quite a

Oh sorry Steve, is the "DecoderProConfig3.properties" file necessary for PanelPro to run and the load the panel file correctly? Thanks, Dave, dlowe30971@... Mobile: +61 (0)432 493

Allen, Try putting the icons in a zip file. Dave Sand

I don't understand that question.

Thanks Steve, The panel is really quite small so I decided to recreate it but it might be a good exercise, like we need more that that right!!! Ok, so without running the cmd will this also have the

I tried to upload the custom icon set to the files area but received an error that images could not be put there. Alternate? Allen

It is my recollection that the instructions with the signal head decoders will tell you if you need to use the offset address or not. It is different for different signal head

Dave, More errors now: 2018-08-29 17:45:04,821 dispatcher.DispatcherFrame??????????? DEBUG - trainID:WP583, tSource:1, startBlockName:IB1, startBlockSectionSequenceNumber:1,