If the Signal Mast is built using already-defined DCC Signal Heads, the offset is accounted for.
I'm not an expert in Signal Masts, but if there is somewhere in there where you have to enter a raw DCC Signal Address, that part of JMRI needs upgrading as well. When NCE's first signal decoder was released, my memory is that I had to add the offset checkbox then, but couldn't find any other location to add it to.
But I can't check at present and won't be able to for some time. I also don't know my way around Signal Masts. Someone else may have to look into it for you.
The New England Convention 2018
toggle quoted message
Show quoted text
On 30 Aug 2018, at 10:16 AM, Penny and Ted Smith <
[email protected]> wrote:
I noticed when adding a signal Head using a DCC Signal Decoder, the box labeled "Offset Address" must be checked for an NCE DCC system.? However, when adding a signal Mast using a DCC Signal Mast Decoder, this box is not available for an NCE DCC system.?
?
Should a box be available for "Offset Address" when using a DCC Signal Mast Decoder with an NCE DCC system or is this offset address taken care of internally in JMRI?
?
Ted in Iowa City
