开云体育

There's only one Roster File for each decoder and programming changes should be saved to that. -- Dave in Australia The New England Convention 2018

I was programing an early econami 21 pin decoder today and noticed there was no legacy function pane and the regular function pane seemed to be incomplete.? Am I missing something?? I'm using 4.13.2

Thanks for those suggestions, Steve.? I will explore some of those other options to see if they are viable. You've aroused my curiosity though about finding someone willing and able to write the web

In (most forms of) automated running, you can only control the position of the train to the size of the block. If you want to stop a train nicely at a signal, it’s hard if there’s a 10-foot block

And yet, that’s what we do around here. Continually. Not particularly efficiently, sometimes having to backtrack, but often successfully. But this is a hobby, not a career. And the costs of

Hi! i got back to this tonight. I verified that the PR4 is connected to the computer. In the device manager I unplugged & replugged in the PR4 & watched disco & reconnect. A new connection was made in

Can you tell me the value of CV 256 for the F45? Thanks, Michael Mosher Webmaster, ECSFM http://www.eastcoastsantafemodelers.org Member SFRH&MS http://www.atsfrr.net/ DCC Master PVSMR

This issue has been discussed Look on the group.io websight for all the comments My opinion is jmri can only be used with the digitrax programming track by chance with paragon decoders. Sometimes it

====================== HOW to ask your question ====================== One of the most common questions about JMRI is "How do I get it to work?". This isn't really a problem with JMRI itself in most

BillWhen you put the loco on your programming track connected to JMRI are you clicking on new loco?If so make sure you choose either Diesel or Steam under Paragon 3 and not rolling thunder.? That is

James, I think you need to define “full timetable system”. My definition is a system that describes the railroad and the scheduled trains indicating the times those trains will be at each

I am having a problem programing paragon 3 decoders.? Has anyone found how to program them with JMRI? I am using JMRI ver 4.13.2 and can't get any changes to enter into the decoders on the programing

Bob, thanks. I tried saving as default. You are probably right that i have to bring the default up each time. This has been going on for me for a couple of years. I just have to remember to go through

I suspect that Andy is probably right (if I understand him correctly) and that the best implementation of a full timetable system would be perhaps a little more from the ground up than the lighter

When I update CVs with the programming file and save the updates to the roster, they are not saved to the roster file in the JMRI file.?? Are there two different roster files and how do I update the

Why wont train length blocks with only the caboose with resistor be adaquate. Tony

I have to ask> Why do blocks need to be longer that max train length? I am assuming all cars have resistors, otherwise yes, I see why blocks need to be like that. Leo

George, What do you mean by "4 blocks separated”? The unexpected blocks in the Block table is a known issue which I am currently investigating. If you upload your panel xml file to the

Just a few comments If you have 3. 4x8 board layout and only 4 blocks your not going to have many trains running. Your blocks should be train length. On my 8x8 layout i have over 40 blocks. I use

I have my layout built physically and in Layout Editor. I have 4 blocks separated in the layout. I am running a Digitrax Loconet system through RR-Cirkits. I am? using Microsoft Vista on my remote