开云体育

Benny, You might try resetting the block paths. Select Tools >> Blocks. From the Block table menu select Paths >> Delete Paths. Save the panel file and stop JMRI. When you start and load the

Ok, than i know since some times it does not change and I probobly click A to B than. Another question. I get strange routing, instead of going direct from point A to D it selects turnout from A on

Benny, I did some testing. I can re-create your problem if I to a multi-segment selection. By that I mean I select A and C instead of A and B followed by B and C. I will add this to my todo

Benny, Normally you want to select the Clear option. This disables the option to use a different color during route setup. The theory behind this option is to let the dispatcher know that the route

There are really several kinds of answers to "How would I keep the multiple streams separate coming into your Jython script in JMRI?” #1 The best answer is “don’t”. If the connections are

To your PC, there aren't multiple streams coming in. There's just one port (can't really tell the difference from RS-232 [or any other serial protocol] at this level). It's up to you (and your

Hi, I get color change on all blocks where I have only letters, like SIa, SIIa, SIIIa, SX. Other blocks has numbers in the name, like S32 or S26a1. /Benny Den m?n 20 aug 2018 21:39Benny Tj?der

If you open a Script Output window _and_ have the Console window open (from Help menu), Jython should give somewhat-useful error messages in many cases. Some go to one, others to the other, so you

It was set to white. I have changed it to green and than I get track color changed to green instead. So after I have set an entryexit it turn to alternate color, which is green. If I clear it i get

I was going to add this on to the Quill question but inadvently hit send ! ? ? When I open a test throttle in Sprog/Decoder pro it defaults to 128 speed steps. I have to go to preferences and change

Jay, Do you have a stand alone PR3? Or are you referring to the PR3 built in to the DCS240? David Klemm Sent from my iPhone 8 Plus ________________________________ Sent: Monday, August 20, 2018

Hi So does it work when you select "pr3 standalone programmer"? Thats a specific option, different from what you described. Steve G. -- Sent from my Android device with K-9 Mail. Please excuse my

Sorry, But something I discovered after Michael Mosher Added the quill choices back into the definitions of the V3, V4, WOW Diesel I down loaded and installed the update to the definition and like

Serial input definitely does the trick - thanks Bob for your example script. ?Got it basically working in less than a hour and set up my Arduino sketch and Jython script to capture various times into

Steve, yes, it is PR3 Standalone Programmer. That is where it is not working. I DCS240 mode everything works & the prefs are OK after restart. In PR3 mode, it always goes to internal after

Several points to comment on: ?yes, JMRI has a speedometer, based on passing three sensor controlled areas. ?I’ve got a small layout so trying for something that will work in smaller distance

Jerry, Better informed members will provide even more information, but for now a short list of sources for clues: 1. Use the Help -> System console.. menu item to open the JMRI System console window

Thats if you are trying to use the programming track on the PR4. If your trying to use the programming track on the dcs240 then its just the command station type. Steve G.

Don't you mean PR3 standalone programmer?

James, To answer one of your original questions, the full documentation for AutoDispatcher2 is in the group’s file area in the AutoDispatcher folder. The current version supports JMRI 3.6 but