开云体育

Bob,? thanks for your patient response to my query.? Unfortunately, I still am not "getting it."? Would you be so kind as to make what ever changes are necessary to close the window in the

Dear Ken, Our last two messages have crossed each other. As far as I understand, I try to replace the sensor part in AutomatonExample.py by ReporterFormatter.py suggested by Paul Bender (second post

Complement to the latter: the state of a sensor changes also when my train leaves its area; of course, this change is to be ignored, as well.

Gabor, So for your purpose, you would change the script to use the reporters instead of the sensors. It would watch for the reporter to change, read it, if it sees the matching loco, then it would do

The first alternative is the case: the (address of the) loco I want to move is known, action (stopping it and reversing its direction) is to be taken only when it gets reported by a sensor, while

Thank you so much.? ?I will work on your recommendations this week and see what I get.? ?I had just started working with schedules so I will dive into this more along with your recomendation.

Graham I'm assuming you're running a recent version of Windows, as I don't see any explicit list of your computer's OS or hardware. If I'm wrong, ignore the following. To perhaps gain insight into

Michael, That's exactly what I needed to know. Thanks for all your work! Greg Komar gkomar@... "Never fear shadows. They simply mean there's a light somewhere shining nearby" _____ From:

I’ve found JMRI runs faster on a Raspberry PI than quite a few mid-range Windows machines. Theoretical CPU and memory speed says the PI is slower. So it’s probably the operating system. If the

Hi Graham, The memory was just an example. It's not trivial to find out what a struggling computer is actually struggling with - and it's not necessarily the computer either. The problem could be a

I think what you are asking about would be like backandforth, but with the addition of it listening for the sensor first, but then checking the reporter to see if the right loco is reporting. Or is

I appreciate your patience with an outsider like me. I don't mind, either, if I mistake, say, a command for a definition but basically I must follow what is going on in the examples for I want to

Thank you Wouter I have added more memory but it still struggles.? Sometimes I can't use the throttles until something clears.? Graham

Hello Graham, What would interest me is what sypmtoms you've seen that make you think it's necessary. There may be more subtle ways of attacking those than the very brute force of throwing multiple

Your tip to place direction sensors on the layout worked a treat and after some forensic debugging have now solved the signalling issues.? Thanks very much for your help. Peter

John, An alternative to only allowing non "E" or "L"? on the barge is to use the the destination tool to "Only allow cars with a final destination" for the barge C/I tracks.? This method would

Hi John, You want your cars to move with purpose rather than just random movement.? In your configuration, the program will grab the first 10 cars from your storage track with the lowest moves, drop

Hi, I have a couple of panels with the, apparently older, SSL type signaling logic set up. Works OK for just running trains around manually. In looking at the instructions for signal masts and signal

The help files kept locally (to your PC) are the version of the help files that correspond to the software you have. The files on the web site are kept current to the latest software (maybe even newer

Well I have avoided this conversation so far because I am a neanderthal who can't stand reading on a backlit screen. I despise Kindle and Zinio. I buy discount/used hardcopies of the current best