开云体育

I changed the design of the detectors.? I took off the rubber based insulation (I put on) and totally painted the "LED? package" except for the top.? I angled the "LED package" a little.? The test

Gents, ??? The subject issue: NCE Power Pro, serial port RS232 connected to PC windows 10 works normally.? Older JMRI version not updated recently.? I have plugged the RS-232 to USB into PC with

JMRI has so many facets you’ll need a manual to use the manual… LOL. Don

Looks like JMRI needs to incorporate more user manual builders so they can keep up with the roadrunner pace. Why don't you start with a cut off date, say in January, and anything new to the user

Did attachments shown up? -- Jon Miller For me time stopped in 1941 Digitrax Chief/Zephyr systems, JMRI User SPROG User NMRA Life member #2623 Member SFRH&MS

Jon, Thanks for your replies. I didn't get the photos you embedded in the email messages. Please post them on the group site. Greg Komar gkomar@... "The nicest thing about the future is

To set the stage, I use a Laptop WIN 7 machine with a SPROG II connection for programming which has worked fine in the past.? Since I hadn't fired it up in over a year? I decided to upgrade to the

I have been trying to get JMRI to work with my NCE Power Pro. Been working with NCE Tools menu and not having much luck. Backup Marco can not get to work error out all the time. Consist back to. Clock

Dave, Your solution sure works. I didn’t read enough of the documentation before turning to the user group. Thanks very much for your expert help. Patrick W.

I model in HO and have several BLI locos.? Most came with a Paragon 2 decoder which I replaced with either a Soundtraxx or TCS Wow decoder.? I like the BLI steam locos because they have traction

Mike, First there will be others that immediately respond they have never had to do what I am going to say and theres works just fine. Good for them! :) My experience back 10 to 15 years when I

Also, I cleaned the F3's wheels and the programming track.

Patrick, The problem is that you are trying to open the throttle XML as a panel xml file. That is causing the errors. To open a throttle xml file, go to "Tools >> Throttles >> Open Throttles

I'm having a similar problem with reading Paragon 3 decoders. I use a 2' programming track with a Sprog II and a Digitrax PR3. They are isolated from each other with a rotary switch. I have DecoderPro

Also I tried installing the test release of JMRI, v. 4.13.2, but it gave the same error message. I don’t know how verify the hash checksums of the download to make sure the install file is not

Dave, I open the throttle panel from the main PanelPro window. PanelPro / Panels / Open Panel… / Documents / My JMRI / Throttle 072318. The file location for Throttle 072318 is in a new folder

/On 8/13/2018 8:50 AM, John wrote:// / ??? Agree. In the photo below the IR detectors? work just fine. The wall/ceiling is at a greater angle and closer for these detectors then the one at the

/On 8/13/2018 8:50 AM, John wrote:// / ??? Agree. In the photo below the IR detectors? work just fine. The wall/ceiling is at a greater angle and closer for these detectors then the one at the

Wayne, What's an EPrompt? I've never heard of one, either inside JMRI or outside of it, either. I suspect that you will need to give us some context on your problem. And I wonder if your problem may

Set CV 29 bit 2 to zero NMRA DCC Only. Mark P Stamm Mark at Euphoriatt dot Com Sent from my mobile device