Locked Re: I/R detectors
¿ªÔÆÌåÓýJon, ? Thanks for your replies. I didn¡¯t get the photos you embedded in the email messages. Please post them on the group site. ? Greg Komar gkomar@... "The nicest thing about the future is that it always starts immediately." From: [email protected]
[mailto:[email protected]] On Behalf Of Jon Miller
Sent: Monday, August 13, 2018 12:18 PM To: [email protected] Subject: Re: [jmriusers] I/R detectors ? On 8/13/2018 8:50 AM, John wrote: ??? Agree.? In the photo below the IR detectors? work just fine. The wall/ceiling is at a greater angle and closer for these detectors then the one at the gates.?
??? In the photo below the IR detectors won't work.?
??? Also note IR floods I had previously installed for another test.? They are not on now but did turn them on once.? They totally flood the detectors and if I change high/low outputs they might work with just the detector part of the module. ? [this requires testing as cars on one track may block the detectors on the other track] ??? The glossy white paint was put on to see if above reflection would help, it didn't. -- Jon MillerFor me time stopped in 1941Digitrax? Chief/Zephyr systems, JMRI UserSPROG UserNMRA Life member #2623Member SFRH&MS
|
Greg Komar