开云体育

thanks?everyone for the help. tonight is train night, so i'll be back at it. I'm interested to see the output of the new usb check commands I have seen here. I have always just relied on "dmesg" to

I wonder if the issue is that the selected locos are already in the Extended Slots in the DCS240, which, because Digitrax have not released the Loconet specs that define how these slots are accessed

Paxton, You can't open a second profile while the first is open if they both use the same interface. Trying that will always show an error. -Ken Cameron, Member JMRI Dev Team www.jmri.org

Peter: In US practice the would be either a track direction switch to manually set direction or picking off the first entry point to initiate what's called tumble down... All the signals in the

I can't get throttle to work and when I set up a second profile it uses the same com port and I get error message when I try to start up.

Hi Dan, About "Aggressive" mode.? I understand that Aggressive (build) mode is the only way to get a train departing staging to return to the same staging track, and that the default 'number of

Is there any way to add a font to be used to print the manifests/switchlists?? I have travelling_typewriter on my pc which provides a neat old-time typewriter effect which we would like to use.? I

Luke, Two things come to mind: 1. Have you cleared the slots in the DCS? I'm thinking issues like a throttle steal situation. If the slots are clear, that shouldn't be a problem. 2. Have any other

Dear Gents, ALSO. Explain why I get the same issues on the club layout with a totally different server? Regards, Robert Diepenbrock

OK Spuds and Fellahs, Here's the ultimate WiThrottle "Stump the Band" question: After multiple attempts at installing WiThrottle with the same repeated dissapointing results as shown below. I

Here's the help link to how staging tracks work: http://jmri.sourceforge.net/help/en/package/jmri/jmrit/operations/Operations.shtml#Staging Dan

Hi Peter In tools->Sections>Tools->"Set Direction Sensors In Logic" If that fails: tools->tables->Signals->SignalMastLogic", find the signal ->edit->sensor tab, and select the sensors you want "Apply"

The web page that Marcus Ammann put together (with assistance from me) explains both how to make a loopback connector and also how use JMRI to test the looped-back connection. It was written

My end-to-end layout includes a mainline single track designated for two way working. It is described in a JMRI Layout Panel that includes Blocks that have occupancy sensor feedback.? Signalling uses

Putty? https://www.chiark.greenend.org.uk/~sgtatham/putty/ Free SSH & Telnet client.

Okay, found two terminal emulators that work on the Pi with Stretch... PuTTY and Cutecom Standard install... sudo apt-get update sudo apt-get upgrade sudo apt-get install putty or sudo apt-get install

Raspberry pi Console run sudo lsusb It will show the USB device types connected not the port name but it's the first step to be sure the Raspbian is seeing the device. Then I would go in JMRI and open

Also: The most useful further information you can give us is the JMRI System Console log. It can be seen by either: - Going to the Help->System Console menu item, using the Copy to Clipboard button

Several possibilities: 1) The port name changed across the reboot. To check this, enter the following command exactly (with spaces and punctuation but excluding the outmost quotes) and press Enter.

Thanks for those photos. They answer several of our questions. The most useful further information you can give us is the JMRI System Console log. It can be seen by either: - Going to the Help->System