开云体育

Are google translations copyrighted?If so maybe you could get their permission to copy paste then paste into another book or software. You might not need an expert in another language just computer

If you cannot throw turnouts from JMRI that tells you to concentrate on making JMRI work. EngineDriver certainly won’t be able to throw turnouts if JMRI can’t do it. Try some basic JMRI checks

Damin, Help->System Console, that will show the 'other' messages for the startup and if something goes wrong. Not everything listed there is bad, a lot is just information. But 98% of the time if

David K, Do the turnouts work from the JMRI turnout table? Also via the Tool->Turnout Control, see if you can control that way too. -Ken Cameron, Member JMRI Dev Team www.jmri.org

As built, there is some information in the USER INFO CVs, about 105. These are on the BASIC tab in DecoderPro. These may identify the individual sounds. However, they are a place for the user to store

I set this script to run on startup in the preferences file and it does just what I want, however the turnouts change state too quick for me. Is there a way to set a delay?

I will do that. It's a club layout and it may be a couple of weeks before I can get back over there. Sent via the Samsung Galaxy S7 edge, an AT&T 4G LTE smartphone

Despx, So, you've written your own server code to replace the WiThrottle server and send/receive responses according to the WiThrottle protocol? Is that correct? There is currently no defined

The OEM decoder comes with a basic sound file installed for testing. You need to select the sound file particular to your loco. After that you need a LokProgrammer to install the file. You'll have

I have downloaded JMRI to a Windows 7 laptop. The laptop also has Java 8. The LocoBuffer-USB is connected and the downloaded drivers work, or they appear to be, because I get both green lights on the

Kenny, Please email me your panel xml file, and I'll verify you have the system names correct. --SteveT

Decoder Pro has identified my new decoder as a Loksound OEM select decoder. It does not give me the option to change prime mover sounds. I have also been unable to change the prime mover sound by

This is driviing me nuts. This morning I deleted all my sensors from the Sensors Table and recreated them as NCE sensors with the laptop was connected to the layout and running in NCE mode. (I am

See below: http://www.newenglandmodelrailwayclub.com/content/convention.shtml That is a huge change from where you were. You have gone from taking to a dummy programmer to attempting to talk to a real

If the ESP-1 message is being sent to the web server, and not the WiThrottle server, then your problems would be explained purely by that misconfiguration on your end. Do note that for DCC throttle

Hi Ken, I have no pictures or anything on the roster as I am just starting with the programme and I still can't read the decoder so there's a problem somewhere that I'm missing. Since I've up dated to

Hello Dave, The start up time for the programme is now down to around 5-6 seconds - excellent. The decoders did state "massoth" on read from decoder and when the correct decoder was selected I did

Hi SteveT, No Engine Driver communicates with a web server consisting of an ESP-1 and a pic18F26J50. I>>>t would be helpful to see the entirety of the messages, including the >>>timestamps and such.

We are looking at the possibility of adding (non-English) translations to the Engine Driver app and would be interested to know: - Is this of interest to anyone? - Would anyone be prepared to

When I try to identify the decoder with DecoderPro, all I get is the following: "Multiple possible Decoders detected - Manually select for the highlighted Decoders or Family", with a highlighted list