开云体育

You have to find out why the JMRI installer isn’t able to put the LaunchJMRI.exe file into the C:/program files (x86)\JMRI directory. It’s not going to work until that problem is solved. I’m

Walt,I did check to make sure JMRI isn't running as you suggested. I continue to have the same problems I listed above. Thanks so much for your time.?Is there anything else I can do? Gary

Is the connection not happening, or does it show as connected and you can't control anything? The reason I ask is I had a problem where it would connect, but I couldn't control my locos. In the

I have been reading up on other interfaces and I am reasonable sure the problem is the interface. ?Thank you for your time. ?I ordered a DIGITRAX PC3 XTRA today. ?I think this will do what I want

Gary: JMRI can not be running when you do the upgrade. I dup you problem by having JMRI running and trying to install the upgrade. Walt

Found the PC board at http://www.locobuffer.com/. I may have built this, don't remember. -- Jon Miller For me time stopped in 1941 Digitrax Chief/Zephyr systems, JMRI User NMRA Life member #2623

Ver 4.8 every thing else works but the slot monitor is totally blank for all tabs

Got the roster problem solved but now can't connect. This is a Windows 7 machine to a DCS100, via a LocoBuffer? Not sure what version of LocoBuffer I have. It's just a PC board with a large serial?

Rick, Can you confirm that you uninstalled Java and reinstalled it? Can you determine if that was the last change before it started printing correctly? Paul

Walt,Thank you for your help. I did try your suggestions and I continue to have problems.? Which browser do you use when upgrading JMRI? I wonder if that makes a difference. During the upgrade I

====================== HOW to ask your question ====================== One of the most common questions about JMRI is "How do I get it to work?". This isn't really a problem with JMRI itself in most

Sharpy We assume you are using a windows system. Is that correct? If windows open the JMRI program folder and run the install test. Let us know the results. More info would help you . What is

On 08/09/2017 09:47 AM, Paul Bender wrote: >> On Aug 8, 2017, at 6:53 PM, wmseapc@... [jmriusers] <jmriusers@...> wrote: >> Here is my System Console below; is this what you are

I have been a model railroader for about 8 years and finally learned about JMRI. ?I downloaded the program and finally hooked up the interface to my computer. ?After many attempts and help from

I followed the suggestion to add -Djogamp.gluegen.UseTempJarCache=false to the JMRI launchers to resolve the hang-at-start problem. See https://github.com/JMRI/JMRI/pull/3880 This didn’t work. The

/On 8/10/2017 4:38 PM, Bob Jacobsen jacobsen@... [jmriusers] wrote:// / Thanks Bob, figured it out. Everything seems to be correct now for DPs new location. -- Jon Miller For me time stopped in

Walt, I was asked why we hooked up the 240 to the locobuffer. The primary answer was that we simply swapped out a single component. Secondary is that as you know Walt is that we have the Digitrax

David: How are the lconets set up? When trying the Locobuffer is it the only thing connected to the jack on the DSC240? Or is the Quad you are getting info from also on that chain? Walt

David Do you get different information if the Locobuffer is plugged into a different jack on the DCS240? like rather than the A sting, plugged into the B or C net. Walt

David, it looks like they intended the USB jack to be the connection to a computer See http://www.digitrax.com/products/command-stations-boosters/dcs240/