开云体育

I can't find WiThrottle for my Android phone. Is there an equivalent for Android? Thanks!! Jay

This may not be related to JMRI but I am sure some of you are using the Digitrax Loconet electronics and some may have experienced this so I am putting this on the board for discussion. I have have

Steve, I've done some SE8c bench-testing for the concept to use the "LDT LS-DEC" signal head type. The concept is sound, and seems to work well. I tried the concept with the SE8c in "fourth aspect

Really glad you found some issues Dave. I am also seeing a 'null' when trying to set routes and it seems to have stopped working again... maybe something I edited wrong in the XML... I hope not. I

Bob, Thank you for this explanation, I've never seen it explained that way! You're right, I assumed 4 states meant 2 bits, either of which might be 0 or 1, every time. I truly appreciate your

Harry I only have one Bachman Locomotive and the decoder that came with it was a very poor quality decoder. ?I wanted to add sound to the locomotive anyway so I replaced the decoder with a Soundtrax

Ken U, Thank you for saying this. I just checked the latest code and it is having an error while starting the CTI config pane. This should be simple enough to trace and fix. I've entered an issue on

H_kane, I just did a quick look at Bachmann's website and for sure at least some of their EZ Control line models have only basic decoders that do not support speed tables. I was able to see that their

Ken Cameron, I have a new Windows 10 desktop and I installed JMRI 4.8. I have successfully setup the Digitrax connection with a PR3 interface and a DCS51 command station. All works correctly. However,

H_kane, Can you tell us what locomotive models you have from Bachmann? Even the Bachmann model number off the box? If those are sound equipped, you should be getting speed tables. If they are

Harry, It may be that the specific decoder that you have does not implement speed tables. Can you give us the details on the decoder model and make. Bachman has used SoundTraxx decoders in many of

Howdy Jack. In the log posted, I counted 76 roster DateModified errors and 15 turnout errors. Do you really have 76 roster entries? I have not had the problem with dates, but the format changed at

Hi Dirk Try removing the PBT from the circuit. I have programmed these just fine with a pr3 + ps14. They are best done by themselves without a second decoder being on the track at the same time. Steve

Terry Visit My Web site@ http://conewriversubdivision.yolasite.com/ Harry ? (You didn't sign your post) so just guessing I have a Bachmann 4-8-2 Mountain With DCC on Board and I am able to access

There are a couple problems indicated here. First, you seem to have some extra libraries hanging around somewhere. This is the “jackson” message you see. There something in the release note about

Ok. Let me pull out the LIUSB-Ethernet I have and connect it to a mac so I can check the port name assigned. That might take me a day or two. I moved recently and there are some things that still need

John, Metrics -- These are part of "layoutblocks", which is an extension of "blocks". The layout blocks schema is missing the metrics element. I can fix that. The default value is 200 which is not

I'm very new to this JMRI stuff so bear with me. I have successfully loaded JMRI and have successfully run trains from my laptop, I've even managed to run two trains at a time from my smart phone

John, I have been building a sample NX setup to test out your problems. I was able to re-create the "turnout" issue for sensors by not adding a turnout to the icon. After adding the turnout name, I

Good evening I have been observing this problem for quite a while and was hoping I might see a change in JMRI 4.8 but have not. It is an intermittent problem that occurs after confirming the Signal