开云体育

Bob, 1. When I create a new control panel and add icons, nothing is visible on the panel until I resize it. After I resize the panel everything is there. I tried different X and Y values and it

Bob or other control panel guru, Once icons are placed on the control panel, the tooltip says "Alt-click to see menu, drag with meta key..." Ok, I can move the icons around with the right mouse

Wow, what a quick response! The miracle of time zones... Thanks for the trace. I can read the reply from that. The ID of that came back as 129 (digitrax), version 241, which is a new code I'd not

Looks good It found my previously configured decoders ok but when I did an ident it failed to find my DN149K2s. I guess there must be more than one DN149K2 version, so here is the trace. time:

I've just uploaded the 1.0.3 test installer. This is a _test_ installer. I'm away from home this week, and haven't been able to really wring it out on my layout. As always, I strongly recommend

Mike: How did you connect Decoder Pro to your system? Are you using MS100 (from PR1)? Is it a RJ11 plug to a 25 pin adapter? Can't get mine to see the loco on programming track. Bill

The AD4 splits its address across two CVs, which is a bit of a pain to do manually. I wrote a little bit of code so that we can specify that in a decoder file, and created an AD4 definition file to

Bob, we have build for clients many panels, we have pictures for Swiss, Autriche and Germany called INTEGRA, VGS, and SpDr60 construct by SIEMENS and for the United States CTC type GE-Harris. We will

I haven't tried it but: The DCS100 can make the program track outputs into a broadcast brake generator (still low current). This should provide power to the decoder when not programming, then switch

I tried a test with my Digitrax DCS100 - the programming track is unpowered until a read or write operation is done. Then the power comes on, the action is performed and the power goes off. So I

Stony, My 'vast' experience includes programming 2 SoundTraxx DSD-150 decoders so I can't offer expert advice. You may want to contact CVP and run this problem by them. There is no risk of

Downloaded and installed Decoder Pro on a _really_ old laptop. All I can say is WOW! All contributors did an awesome job on this. I look forward to using and possibly developing applications using

Mike I may have spoken too soon. The 82 ohm resistor cured my problem with SoundTraxx decoders but I still can't read values from Digitrax decoders. I've tried resistors from 68 to 150 ohms with no

Bob, Let me first say that while the decoders under discussion belong to Digitrax there are other decoder manufacturers that are effected in the same way. This is just a suggestion and works in

Bob Jacobsen wrote:

Comments below Bob Jacobsen wrote:

be a read-only variable on the programming screen.< The PR1DOS software has a special DZ121 program button. I would suspect the way that's done is to lock out programming CV01, basically what

At 3:15 PM -0700 7/31/02, Jon Miller described a nasty feature of the DZ121: The nasty thing about this is that there's no way for DecoderPro to fix it while the decoder is on the programming track;

I started to throw together a pane for this last night. In the process, I discovered that the address is split between two CVs, much like the long address in a locomotive decoder. It's inconvenient

Great! I'm interested in working with you on this, esp. on signalling. Also, if you create a set of good icons, please consider sharing them. It would be great to have more than just the simple ones