Added new "log curve" button to speed table.
Looks good
New organization for Digitrax decoders. This should work for
existing rosters, please check and let me know the specifics if
it doesn't.
It found my previously configured decoders ok but when I did an ident it
failed to find my DN149K2s.
I guess there must be more than one DN149K2 version, so here is the trace.
time: 21:44:41
packet: ef e 7c 20 0 0 0 0 2 7 7f 0 0 38
Write Programming Track: Read Byte in Paged Mode on Service Track
Setting CV8 to 255 (0xff)
time: 21:44:41
packet: b4 6f 1 25
LONG_ACK: The Slot Write command was accepted
time: 21:44:47
packet: e7 e 7c 20 0 0 0 4 2 7 1 0 0 4a
Read Programming Track: Read Byte in Paged Mode on Service Track
Setting CV8 to 129 (0x81)
Status = Success
time: 21:44:48
packet: ef e 7c 20 0 0 0 0 2 6 7f 0 0 39
Write Programming Track: Read Byte in Paged Mode on Service Track
Setting CV7 to 255 (0xff)
time: 21:44:48
packet: b4 6f 1 25
LONG_ACK: The Slot Write command was accepted
time: 21:44:57
packet: a0 1 61 3f
Set speed of loco in slot 1 to 97
time: 21:44:59
packet: e7 e 7c 20 0 0 0 4 2 6 71 0 0 3b
Read Programming Track: Read Byte in Paged Mode on Service Track
Setting CV7 to 241 (0xf1)
Status = Success
Panel icons greatly improved.
Looks good, now if I just had a layout...
Cheers
Alex
