开云体育

Thanks Dan.? Keep forgetting that 1 train restriction.? Had my Arrival track set for pickups "any" Doug

Joe, I've also posted before about my own experience with CV 217 and Paragon3s. I've mentioned the values that have worked for me with various models (20-70), and that the trick on the programming

Are you using ANY "Logix", "LogixNG", or "Jython Scripting" which can cause a signal mast to change its indication? That could cause the "SML logic" to "oscillate" between indications - one from

Steve, There is nothing in the log using a basic level. Does it work if using a simulated connection? I'm using a DCC EX command station and the simulation mode is not very reliable. If I

All my spurs are terminated with virtual dwarf masts. All are set to stop and saved. My SML is auto-generated. The mast at the turnout throat rightly displays approach when the turnout is aligned to

Hi Dave Yes that worked.First time i did it,i got confused when it ask for 4 blocks so i made up 4 blocksand of course it wouldnt let me attach one sensor to 2 (different named) blocks. Thankyou

Did you do the slot monitor test mentioned above? You did not actually mention which DCC system you are using. From one of your replies, seems to be a Digitraxx system. Clearing the slots with Slot

Which signal system are you using for the signal masts? Have you created the signal mast logic (SML) from Signal-A to Virtual-A? Dave Sand

Over the past few weeks we have started running into a long latency issue between the signal mast logic and the turnouts that controls each LED. We are using a Digitrax system with a CMRI network for

Running JMRI 5.11 and have created a number of Signal Masts, each using DCC Signal Heads (I use NCE Light-Its). I am wondering if I have setup something wrong, or if someone can some provide some

No just the original JMRI that came on the program for learning. -- Mike Swederska Meramec Valley Lines Modeling Mopac equipment in 3/16

Sounds like a java issue. My Win11 laptop required java 21 to run JMRI 5.4 version last year. Good luck Sincerely, Vincent Marino Vincent Marino [email protected]> wrote:

Recently it became necessary to reinstall Java and JMRI. First, I checked that both programs were uninstalled. I then installed Java? Version 8 Update 441 and JMRI Version 4.26+R381. Both were

Mike, Recreating your roster index shouldn't eliminate the operations part of JMRI.? Something else happened.? Do you have more than one profile? Dan

I am lost as to why I cannot access my railroad in operation pro. I have been using the switch list almost every day to operate sine 2022. Evrything was fine tuned to fit the railroad. And yesterday

Tony, Warrants have never been in Tools -> Tables. You might be thinking of Warrants entry in Preferences. Dave Sand

Any info on how to find any other variables controlling speed during automation. The engines ,3 of them, dont run very fast even at 100% speed by throttle but the automation is running them at a

Bxp88’s always powered from the output of a PSX breaker with all 5 breakers getting power from track output of command center. Can anyone tell me what happened to the last table that use to be part

Jean See if there's anything in the logs. Also, in the debug menu you can up the logging level of the dispatcher to debug or trace. See if it's waiting on an allocation, or signal. The signal issue

All, Nothing surprising. My Compare current loco with saved loco CVs shows no differences. Frankly, I would have been shocked if somehow DecoderPro's CVs tab Compare missed something. At a loss how