开云体育

Hey Gene, Can you open the OperationsPro menu to be able to see a choice for "Settings"? If so, try using the "Restore" button at the bottom of the Settings window, and check to see whether your N&S

Mark, We sold may Rev-o units before Windows 11 and newer Mac machines caused issues with 3rd party drivers. Dick :)

Hi Steve you said in your reply: ” You will have to do some fancy stuff with the double Xover as the ssl generated is wrong.” can you please elaborate what is wrong with the ssl? And what can I

Gene, Upload the messages.log file to the group's ProblemsBeingWorkedOn file folder. If you are running Windows, the log file will be located at C:\Users\<username>\JMRI\log. Dave Sand

I came up from running my last train and went to terminate the train. When I clicked on the panelpro to get to the N&S Railroad data the help screen appeared out of nowhere and a message came up that

Thanks that was a great help -- +=============================== |. *Vimal Parikh* +------------------------------------------ | JMRI version: 5.8+ | Java Version: 17.0.10 | Command Station: DCC-EX

On Thu, 23 Jan 2025 Peter Ulvestad wrote: I believe the rev-N were the last before being replaced by the LB-NG. They had version 3.00 firmware. I have an older LocoBuffer-USB with version

I suggest going back to even more basic stuff... 1) Start from the factory-reset decoder, with address 3. 2) Put loco on programming track, and read the loco's address using JMRI, this should be

Vimal In simulation mode the panel works well, and after stopping the trains from B9 ClockWise and B6 Clockwise. they restart perfectly. When the train reachs the end THe train status goes to "Done"

Dave, There was a firmware update that dealt with this. Check your version via the CMD STA option in the cab. The Dec 2023 date has the bug. There is a way to get the update and download it but it

One of mine is 2.040, the other is 2.070. The 2.040 is rock solid and used most days, the other is spare and used less frequently, and had occasionally been weird, as in won’t work and then

Martin, One way (not necessarily the only nor the best) would be to use the "Random" feature within the train's route.

Scott: No worries! ? I should have mentioned that in my original post since I’d seen other posts where folks had tried to use the USB adapter with a PH5. My only available connection in JMRI

I presume that as well as changing the long address in JMRI you also made sure the setting to use the long address is also checked?? What value do you have in cv29?? Phil G

Sorry - I guess I misunderstood.? I thought you were using a USB Interface board. Are you sure you are using the correct port in the JMRI Preferences - Connections?? To be certain view the

Yes. The PH5 is connected directly to my computer via USB A/USB B cable. Dave Sent: Thursday, January 23, 2025 1:29 PM To: [email protected] Subject: Re: [jmriusers] New PH5 with USB "B"

I assume the new NCE PHP is similar to the older models in that it has an interface built-in - just in this case the connector is USB not Serial.? an NCE USB interface will not work with a

Good day all! Bottomline issue:? JMRI “sees” the AIU but AIU data is not showing up in JMRI. My apologies if this has already been hashed and rehashed multiple times, but I have plowed through

Thank you Steve, I did read Nigel's post above and taking the short address 125 Digitrax it as 0125 so I then moved onto giving my HST, 1125 and JRMI, still left my HST, as a non runner so having to

I do wish CPE provided grid lines! -- H.O. Australia (Layout in Progress) Digikeijs DR5000 LocoNet JMRI v5.10 DecoderPro/Warrants/CPE/SML/LogixNG Java: OpenLogic jre-17.0.12.7 ? Windows 10