开云体育

Ed, Make sure that the block topology is valid. Use the Layout Editor "Tools -> Check" menu items. especially the "Non-Contiguous Blocks" item. Watch the system console for block messages. The

Gentlemen: I am using Version 5.8, Java 12, on Windows 11. Digitrax system I have the need to know where trains are on a complicated Layout Editor panel. I have added block content boxes for all

Interesting problem! Could you please repeat that test with the “TRACE” level logging enabled for jmri.jmrix.lenz.XNetThrottle, then upload the resulting session.log file to the “problems

Hi Eric, Answers: 1.? ?Yes to both Setouts and pickups in Golden Yard at both start and end of route. 2.? ?Yes both East and West for Direction on Track. I had made both of those mistakes in

Martin, A couple of quick questions - 1. In your Route definition, is the MP08 NG Golden Yard set to allow both pickups and setouts at the start of the route? I had a similar problem which was caused

Sorry for the long delay in response.? Was tied up with activities outside my train room. Attached is the Build Report I have 4 cars of type "Box Proc Ore".? ?Numbers 7,8,9,10.? ?7 and 8 are L

The key point is to get the backup off site (your house). Just ask the model railroaders who once lived in Pacific Palisades or Altadena. You'll also need something for Insurance proof of ownership.

Hi there, I am experiencing an issue with JMRI, I am using the latest 5.10 production release. I experienced similar issue with the previous version. I am using a Lenz LVZ100 command station with a

Mw: You are correct, I must admit I never notice this before and I been using JMRI forever. Thanks, Joe Sent: Sunday, January 12, 2025 10:52 AM To: [email protected] Subject: Re:

Because you have selected the Edit Only radio button on this page, I believe:

Jean Louis, Look at the "Values" menu in the "Block" table. There are three options to control what should be done with the retained block values from the previous PanelPro session. Selecting the

Why does the CV Pane look like this in all decoders? See Attachment. Regards, Joe

Hi, Just to advise that I have finally managed to import an update of my home-grown file into version 5.10. That said I found it no where near as easy to do compared to installing it in version 4.26

Why not just keep the roster in the cloud, then it’s reachable from multiple computers as is and backed up all the time? I use Dropbox https://www.jmri.org/help/en/html/setup/Dropbox.shtml but any

Thanks Steve, What is it for? Is there a way to avoid that? Does that mean that we must open JRMI in the same state as when it was stopped? I have another question :

Jean When you last closed jmri that blocks block value was not empty. On opening the panel now the block is not occupied so it's not restoring the value. Steve G.

Hi, I have a new error message I don't understand : 14:03:09,111 t.display.layoutEditor.BlockValueFile ERROR - block MainEast unoccupied but has saved value, not setting any block values,

Ken, If the image is in the roster entries directory the export function does include it in the file. I've never experimented to see if a path is specified with the image file name whether it will

Close to final report: After checking all the locomotive roster entries, and the roster.xml files and system consoles on both machines, I realized there were slight differences in the roster paths,

Ok, thanks for the quick reply Steve.