开云体育

Joe The Transit defines the route the train will take, dispatcher allocates sections ahead of the train, to be allocated they cannot be allocated to another train, and the blocks in the section are

Tim, Start PanelPro. Go to Help -> Locations. It will show you the locations for each type of JMRI data. By default, other than the install location, they will be sub directories under the

It would probably be best if we not talk about that............. Someday I may come back to it but for today I just want to COMPLETELY remove it all code, all data, EVERYTHING. Can you please tell

I wouldn’t remove Java - just in case something else requires it But why are you removing JMRI?? Phil G

Good day, So does anybody know how to COMPLETELY REMOVE JMRI from my PC that is running MS Windows 11. EVERYTHING all code, all data, registry entries etc etc etc etc. I will also need to remove

David What I'm trying to do is simulate a terminus station. I have a track coming into the terminus with an UNKOWN train, stopping in a block before the station(in2). It then examines all the

Steve, That is interesting that you can run Dispatcher and set it to No Signals. What causes Dispatcher to start & stop trains where they might collide? Is it just the occupied block(s)? Will try

The Tooltip for CV="10" item="EMF Feedback Cutout" default="0" tooltip="Up to 127, this sets the speed step above which the intensity of BEMF control will be reduced to zero. Values over 127 cause

-- Peter Ulvestad JMRI Users Group Moderator ( https://www.jmri.org ) Tam Valley Group Moderator ( https://tamvalleydepot.com/ ) Sprog-DCC Group Moderator ( http://www.sprog-dcc.co.uk/ ) Edmonton

I find track pools to be an extremely powerful feature of JMRI operations. -- Tom

Here is a screen shot when I can get it to connect. for what its worth. I have not done anything but restart the PC and JMRI a few times this morning. 10:54:00,974 apps.util.Log4JUtil ? ? ? ? ?

Hi all, I am at my wits end again trying to run (trying to perfect) Auto trains via Dispatcher. The symptom is when running Dispatcher several transits do not run to completion and cannot be

He has since posted on the Soundtraxx group TSU-1100. Thanks Peter. He will hopefully get an answer there. Soundtraxx references their Tsunami2 technical manual for the TSU-1100. I find no mention

Hello Daniel IPv6 has always been enabled. I just now disabled it and restarted JMRI. No change. so I set it back to Enable

Trent, Have you disabled IPv6? If so, try to enable IPv6 to see if the problem goes away. After you have tested that, you can probably disable IPv6 again if you want. I think the server works even

See this thread: /g/jmriusers/topic/108041262#msg233712 There seems to be some possible workarounds: 1) If you have IPV6 disabled in your network settings, re-enable it 2) Pick up

Trent, I believe the problem you are having is with WiServer not JMRI server. It is WiServer running on that PC that handles the EngineDriver cell phone throttles, not JMRI server. -=Tim

if there is a better way to link the copy of the log please advise. Thankyou

We have been experiencing what I think is a JMRI server connection issues at my club. When we turn on the PC it is set to automatically start the JMRI program.? JMRI at start up loads our CTC panel