开云体育

There was a Yahoo Group called CATS-users@... The last message was late November, and Yahoo now has deleted all user messages as of December 14. So it would appear the only place to

If SoundLoader is working, try to make sure that JMRI is using the same settings (Port). Make sure you try exiting SoundLoader and restarting it too. If the issue is down at the driver level, that

Bill, They'll only be seen if fitted to a loco (or a motor across the motor terminals). They are possibly

i have been using DecoderPro for programming my DCC loco decoders (in all scales) for several years now, because the graphic interface is a lot easier to operate the trying to do programming

John, I don't have an answer to your specific problem, but your description of actions has issues. "I saved the panel from the My Panel window and from the signal head tools/table window." The panel

Just finished creating and placing signal heads for 10 turnouts, complete with very basic SSL for each head. All turnouts were working properly from the panel and the heads were responding

I have joined the group again after a hiatus of a couple of years.? I've still be putzing with JMRI and have progressed (ish). I am stuck on a couple of things.? I am having trouble with the

HI I got JMRI going onn my laptop with windows 10 and I made a roster but now how do I get connected to my dcc program track to program with decoder pro? I have a new Digitrax DCS Zepher Express

Larry, For the timed script you can run it from DP or PP. Using the timed script, you will find the loco drifts one way or the other over time. Using optical sensors, you need the additional hardware

Thanks Marc you just saved me couple hours of car time and the cost of a PR4. ?Interestingly, on a second try with the PR3/Soundloader setup on the PC I get a COM error message and cannot connect.

Even more simple is BackAndForthTimed.py. No need to sensors at each end. These are run within PanelPro? >? Panels? > Run Script? after you have started? PanelPro > Thread Monitor and? Script

Bob, I was able to get the browser view working. I had to change the style sheet href and disable cross-origin restrictions in the Safari Developer menu. The XSLT appears to work OK for most things.

Update :? A replacement computer? was sourced,? running Win10,? and all is well. JMRI 4.18 is now up and running fine. Not really a "solution" in it's self but he is happy with the outcome.

PR?#7992 has been merged.

I would not waste my time / money. To Windows, PR3 or PR4 are one and the same. Same driver, same setup.? If you can't get the PR3 to work, you will hit the same wall with the PR4. Also the PR4 does

There is a specific process to update the PR3 and it is documented on the Digitrax web site you should read it: http://www.digitrax.com/media/apps/software/download/24/PR3_Update_v1.0_for_64bit.pdf 1

One last update for the benefit of others who might find this thread. Exploring based on Marc's comments, I found Digitrax's Soundloader 2 software and installed.? My PR3 worked the first time, no

Sorry, I meant the various block, logic, etc, parts that live in a panel file. If that all displays nicely in a browser, then it would be easy to move around with ^F (or equivalent) to see what

Thanks -- that was quite helpful. Of course that led to further questions -- It seems that LRoutes and Double Crossovers only understand Signal Heads and not Masts. So how do I associate a Signal Mast

There is a script to do this included with every release. For some funny reason it is called "backandforth.py". It is in the jython folder of the resources folder.