On Sat, Feb 1, 2020 at 01:35 AM, <gjs1010@...> wrote:
Thanks Marc. ?I tried the update about 5 times, "program failed", "port not recognized" error messages.
There is a specific process to update the PR3 and it is documented on the Digitrax web site you should read it:
http://www.digitrax.com/media/apps/software/download/24/PR3_Update_v1.0_for_64bit.pdf
1 -. The PR3 must be in a specific mode for the update.
2 -? DIGIIPL will indicate a failure of the update run.? This is normal.
3 -? If you are still encountering COM port issues with DIGIIPL,? some thing is faulty with the hardware involved..
You tried to run the DIGIIPL firmware update 5 times and it failed, you have either a bad USB socket, bad USB cable, bad PR3 device.? Using DIGIIPL? rules out anything JAVA or JMRI related.
Try uninstalling the PR3 from Device Manager and reinstalling it. Win10 will use it's own driver? ( usbser.sys )? but if Windows does not even see the PR3 on occasion, playing with driver will not help you.
Marc
