开云体育

Craig, The PR3 doesn't use an external USB-Serial adaptor. It's inbuilt and reports as a standard USB Modem Class device so doesn't need driver installation either. Have you carefully followed the

Just to let you know that the install did not change. I had trouble deleting several of the registry entries due to a permissions problem. I deleted 2 "Keys" JMRI matches & 9 "Values" JMRI matches. I

oh, and I tried using my digitrax power supply for my DCS52 plugged into the PR3 and it made no difference on getting any reading from the programming track or in the lights on the PR3. Craig

Thanks Marc, I am set up in Stand alone mode, my lights seem to work as you described. I may be wrong but I had all the cables in the same box and only had one power supply for my DCS 52, which I run

That is not a JMRI version issue, that is an "OPPS" on the part of the author of the definition file who added the TSU2 2200.? He mistakenly used those from the ELECTRIC and that is why you see

Bill, 4.16 will cause you troubles with a LocoBuffer-USB. Upgrade to 4.17.4 or wait for 4.17.7 due out very soon now. (don't use 4.17.5 or 4.17.6 either) I'm not saying that this is the cause of your

The web client now supports arrows, bridges, end bumpers and tunnels! ;-) Do you need to download a file to get these decorations, or are they in with the updated JMRI? Thanks,?Scott Clements On

I just downloaded version 4.16 (Windows 7, Loco Buffer-USB) and trying to program a Tsunami2 steam 2200.? How come the NMRA legacy function map does not match that shown in the Soundtraxx manual??

Dave, Thanks for your help I'll try reinstating Sections, Transits and dispatcher, change the colour of my tracks, and upload the xml if it still doesn't work. I probably ought to do some research

Alasdair, Since you have defined the layout structure using Layout Editor, Dispatcher is probably your best choice for automation. Layout Editor based NX is designed to implement NX based

System Details: MERG CBUS using CANUSB for infrastructure control Lenz LZ100 via Lenz USB to run trains I'm using resistive wheelsets and block occupancy detection Points are all SEEP solenoid motors,

Dave, I will uninstall all JMRI references, i.e. programs & registry a little later today. First, I have to clean up the "workspace" while trying to make sense of all the paper I've printed. Almost

Thanks for that Perry. Has been updated now and will usually be incorporated in the next Production release. If you're interested, you can follow the process of this getting into JMRI on GitHub at

Note: the web client does support each block using different colors; you may be able to use that to further distinguish your tracks.

It’s on my to-do list… but pretty far down… :( The panel.js file need some major refactoring… but without any way to write test cases it’s very fragile… at the very least I’d like to see

The Signal Mast Repeaters section in the documentation has a typo on line 2 that says, " ..., and *van* be set as Slave, ...", instead of, "..., and *can* be set as Slave,...). The bold face added by

Renton, You want to move the script to your User Files Location. Use Help >> Locations and select the Open User Files Locations. The Finder will start at that location. Never change the contents of

Tim, I assume you are talking about an occupancy sensor. Since the occupancy sensor represents occupancy state for trackage between two block boundaries, the corresponding track components on the

Hi Dave, Looks useful, thanks for the help. However I am not familiar with Java and cannot find the Jython folder on my Mac, do I need to run another programme to set it up? When I follow your

Hey everyone I am trying to create a layout and trying to get multiple blocks on layout editor controlled by one single sensor how do I do this. thsnks Tim