开云体育

Michael, I think you'll find your QSI-specific answer here: <https://jmri.org/help/en/manual/DecoderPro3/Comp_Speed_Talble.shtml#gotchas> Dave in Australia

Jeff, The warning will no longer appear as of the 4.17.7 test release. Dave Sand

Do you all know that Bachrus shut down last year?

May sound dumb? but, once done,? you are doing a " Write Changes on Sheet " or " Write full Sheet "? so it all gets written to the decoder? I assume ? Marc

Michael, IN JMRI the two items you mention are are covered over two panes. The first has V start and V max with the option above to use these instead of the speed table - select this option. V start

Unfortunately, the fellow operating Bachrus has retired I believe and shut the business down a couple of years ago. Other than a resale, I doubt there are any new ones available. I believe the

I am trying to decrease the max speed on a loco with a? QSI, ver. 6. As discussed in the Comprehensive Programmer, I have set the Vstart to Zero and the Max Volts to One. On the Speed Table page "Use

What is "Hysteresis"? Does this have anything to do with setting the TCS decoder momentum, brakes, etc to 0?

I am looking to buy a 50 series reader and JMRI interface for the Bachrus Systems. If someone wants to sell or knows of where to buy please let me know Kurt

I've heard the same and you can see it sometimes on videos that prototype locos start slightly differently even the same type. So long as your locos don't fight each other with slipping wheels it is

Phil, Just one catch.. this (ver 1511)? is a new re-install. 1507 was the first Win10 release (2.1)? so this is all ready back to the beginning : -). Trying to get the update via another means and

Not sure which " Marc " this was directed at to but I will try and provide M2C worth. The distance between sensors you must provided in scale feet (or scale cm) You can have 2 instances of

Hi Marc, I had a similar problem with Win 10 Pro after the last update and it refused to do any further updates. Having dealt with MS Help desk/chat the only solution found was to do a clean install

I must now? agree with Dave. I just checked my JMRI installs on two Win10 systems both are running JMRI 4.17.6? and one has the uninstall? under 'Start', Apps ' JMRI ' the other does not show the

Thanks Ken and Marc for the additional info.? I'll check into the suggested solutions and report what happens. Russ

I remember years ago (about 60 years!), I got to ride in the cab of a FP7 or 9 with an Alco (RS-10 probably) behind it for a passenger train power. Every start, got a 'bump' from the Alco unit to the

I agree, I use several makes and types of decoder, I have old decoders that have been out dated before I've managed to fit them, so long as they can do what I want I'll still fit them. Definitely set

Tony, I recommend that you use the Windows Control Panel to remove JMRI. When that is done, use the File Manager to delete the left over C:\Program Files (x86)\JMRI directory (or possibly C:\Program

I would add the prototype also knows to not mix certain locomotives. So your roster may end up with the same issue of some can be put in a consist together and some only with other locos. Speed

Paul, We were saying that while working on speed matching, FIRST you do it without momentum enabled. Then after you get them running the same at slow, medium, and fast speeds do you work to get a