开云体育

Gents,? Koos reported the exact same symptoms using JMRI/SPROG and ESU decoders back in 2015. There was no follow up and? thread was a dead end. He was using a LENZ system on his layout in 2015 and

Steve, Please post a copy of the Help >> System Console, select Copy to Clipboard. Dave Sand

Hi First, thanks for the effort and time the authors put into this software and for making it free for all. I appreciate it!. I have just loaded JMRI onto a old windows 10 netbook as a more portable

Hi. I experienced similar behaviour with turnout pairs. I found that if I linked (in your case) TO09 as a "slave" to TO01 but did NOT 'slave'? TO01 from TO09 the problem went away. Switching TO09

torikoos, What does that mean? 1) Does it mean that you've tried multiple LokSound-equipped locos? 2) Does it mean that you've tried multiple JMRI definitions? If you mean (2), there's one and only

Bob, I have DCC++ Arduino Mega base station connected via Ethernet to Raspberry Pi Jasen

That I know, but even in OPS mode, when the SPROG is not limited and can be used at full capacity it is still doing the exact same thing. ?It is not happening with other decoders such as a Tsunami

What type of hardware connection is “D”? It may be that’s not coded to end with more than one command queued, which would be a bug. If that’s it, perhaps you can work around it with

Here is what I'm trying to do but doesn't work. Only DT1017 Throws no track power off. import jmri # Define the shutdown task class MyShutDownTask(jmri.implementation.AbstractShutDownTask): def

Dave, I’m having trouble adding another shutdown task. ?It seems like I can only have 1 thing like power off. If I add a turnout (just a digital output) to turn off it will not do both. If I

You can create a Logix that looks at a Sensor and fires off a specific script when that sensor changes. In turn, that sensor could be connected to an external input, a user click on a panel, webserver

Most likely you are seeing the results of low current limit on the programming track. Programming tracks are design to operate on minimal current. This is to protect the decoder from faulty installs.

Yes, now Manageblocks2 works fine. Thanks, Torgrim

Hi? guys I try to write a script that? ? ?display? jython? gridbox ( or any other? ?swing? ?object ) that? every row? display train? status . my problem is if I want to delete a row,?

Torgrim, Add the following two lines before "from java.awt import Color" import jmri import java Dave Sand

I just purchased 2 dash 9 engines with emu sound decoders. Am i going to have issues using jmri decoder pro to program them. Will i need an extra programming device Tony

This may or may not help... clean the programming track and wheels. I have had the odd problem before, I find a quick clean of the program track helps, after all, it isn't used that often so it will

Hi all, As usual I find JMRI Decoder Pro a huge help in setting up decoders. ?However I find that when I program an ESU Loksound decoder (aside from sound programming for which I use a Lok

Hi Dave, Now I have installed the 4.17.4 release. Manageblocks now works fine. Manageblocks2 gives errors in the system console when started, see below. Torgrim 2019-11-01 17:02:00,800

Torgrim, You could also manually add rIndex and rDirection to the memory table. There might be other "r" names. There was a problem at 4.16 when creating memory names on demand. ManageBlock2 added