开云体育

Tim, Was it using Direct or Paged method? Paged is slower than Direct. Also if it didn't match the decoder right, it could be asking for CV's that don't exist on that decoder. -Ken Cameron, Member

Am 30.09.2019 um 22:19 schrieb Dave Heap: Yes, that should work fine. I do not use Dropbox, but I share my VSD files for several JMRI profiles. My path looks like "C:\Users\Klaus\JMRI\vsdecoder\".

That worked!? At least, it's reading CVs.? ? Though for some CVs it says " programming error no acknowledgement from locomotive" then seems to try again and in at least some cases moves to the next

Tim, Try upgrading to 4.17.4. There is a bug in 4.16 that causes connection issues. Dick :)

Mike, You don't have to if you plan on running real time, one after the other. However if you get too far ahead you will end up with a lot of caboose hops as there won't be any open spurs to receive

Hello all.? I posted here once several years ago about this topic, and the advice that worked was to use COM 3. Well, for me the hobby as been dormant for a few years and now I'm back to bug you

If you terminate a train then the cars will be available for other trains However, if you are running more than one train at a time during the session cars might not be set out at a location when the

If all fails, reset the decoder. Our experience with BLI with early QSI and then Paragon, is that at times for no apparent reason, they stopped working. We never found the real reason, but we did

Thanks, guys. I love this program! However it’s clearly going to take me a while to get used to it. Thanks again. I anticipate having more questions and maybe even offer advice at some point. Paul

Bob: Well... engine can also be put to sleep pressing F9 a couple of times puts engine into idle mode F6 will wake it up... Then there's the suggested check CV19 if not 0 then a consist has been set

Conrad, We have some documents to help with using Dropbox for

Steve, ?????? I was able to get the Simulators to work and saw no problems with 4.17.4. ?????? I upgraded the club computer to 4.17.4. I added lights in about 30 at a time and eventually started

sorry more of the console file: 2019-09-30 13:17:44,471 util.Log4JUtil??????????????????????? INFO? - * JMRI log ** [main] 2019-09-30 13:17:44,517

Here is the system consule file, i cannot get it to re-program the loco and when I try to run it on the main track with address 7546, does not accelerate. the horn sounds wen you press the function

It's possible but unless you're only operating a single engine on that route it gets complicated fast... JMRI can sense a locomotive passing a point with either optical or in track detection and send

Usually F8 on throttle

I am relatively new to this user group but really appreciate the help and advice.? I've searched the posts for "dropbox" and found many, many posts but not the one that solves my problem.? Sorry if

I would like to turn the sound off on a loco as it passes thro a tunnel? is this possible and could someone point me in the direction of how Thanks in advance

Hi, Several things may cause the problem and one of them being that the decoder may have lost its address, try the primary address of 3. The other problem could be that the motor drive circuit went

Check address first. Then suggest check CV 19 to see if it got MU’d which it kind of sounds like. Can you control any sounds or other functions beside motor control? Kurt